Contact us
Back to Top

PE Series

>PE4000B Series >System Monitor

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.


  • Install this dirver in the case of the following.
  • In the case that you have an SSD/CFast Card without an OS installed and install the OS.
  • Basically, it is unnecessary to install if you have used the SSD/CFast Card with an OS preinstalled.
Title System Monitor
File Name System_Monitor_Setup_2.1.802.0.exe
File Size 57,723KB
Version Ver. 2.1.802.0
Supported OS
  • Windows® Embedded Standard 2009
  • Windows® Embedded Standard 7
Description System Monitor for PE4000B Series
After installing this software, you can use the state monitor function of the hardware.

Installation (This is a self-extracting file.)

  1. Click on the above file name to download the data to a desired folder.
  2. Double-click the downloaded file. (Any extraction destination will do.)
  3. When [Extract] is clicked, the file is extracted.
  4. Execute the "System Monitor Setup.exe" file in the folder to start installation.
  5. Complete the installation by following the messages on the window.

Update History:

[Ver. 2.1.802.0] (Sep. 11, 2014)


Posted :Sep. 11, 2014

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.