>Digital Electronics Corporation Internal Device Driver for No Connection
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Ver. 1.13.03 (Oct. 29, 2009)
The following issue was corrected:
The screen switch was completed. However, the first bit of common relay information 2032 is not turned off.
Installation (This file is self-extracting.)
Please confirm that supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
* This driver is a system driver that is automatically configured when not selecting "Device/PLC", or a preselected
driver is deleted. Users are not required to make configurations for this driver. To confirm whether the driver is selected or not, go to GP-Pro EX's "System Settings", and see
"Series" in "Peripheral List".
Update History:
[Ver. 1.13.03] (Oct. 29, 2009)
The following issue was corrected:
The screen switch was completed. However, the first bit of common relay information 2032 is not turned off.
[Ver. 1.13.02]
The following issue was corrected, and setting was added:
An unnecessary memory might be secured.
Support Device monitor function
[Ver. 1.12.01]
The following settings were added:
The following related units were added and supported.
GP3000 Series, WinGP
[Ver. 1.11.01] (Aug. 25, 2008)
The following issue was corrected:
When writing to system area, display takes time till the value reflects in screen.
Last Updated : Oct. 29, 2009
Posted : Aug. 25, 2008
