| code |
message |
| 18000 |
Cannot find Screen File Number XXXX. |
| 18001 |
Cannot find Screen File XXXX. |
| 18002 |
Applet cannot be started, because Communication method has not been designated. |
| 18003 |
XML Analysis error |
| 18004 |
Primary node name does not exist in browser.
(DEFNODE parameter is not designated in the HTML file.) |
| 18005 |
Polling start-up failure error |
| 18006 |
Read Error: Image File |
| 18007 |
Read Error: Mark File |
| 18008 |
Cannot start the GP Log Data Display program. |
| 18021 |
Data transfer has been interrupted (Transmission Time Out) |
| 18022 |
Cannot link Traffic Center DLL (DirectTCX.DLL) |
| 18024 |
Pro-Server returned error after attempting device read. |
| 18025 |
Pro-Server returned error after attempting device write. |
| 18023 |
Pro-Server returned error after analyzing device name. |
| 18026 |
Pro-Server returned error after attempting GP reset. |
| 18027 |
Due to network error, unable to send data |
| 18028 |
Response communication data packet contains illegal data |
| 18029 |
Response communication data packet header is illegal |
| 18030 |
Illegal code in communication data packet : |
| 18031 |
System Error |
| 18032 |
User Name data entry has been cancelled. This is because the current user does not have the access privilege. |
| 18033 |
Cannot find File : XXXX |
| 18034 |
JAVA Error : XXXX |
| 18035 |
OS has detected error after calling DirectTCX.DLL : XXXX |
| 18036 |
Incorrect version of protocol format. |
| code |
message |
| 19000 |
Cannot use TCP/IP: Details XXXX XXXX |
| 19001 |
An error has occurred in TCP/IP socket: Details XXXX XXXX |
| 19002 |
Received XXXX bytes of data. Data is too large. |
| 19003 |
System error: Received only XXXX byte in XXXX byte data reception request. |
| 19004 |
System locked. Program will be shut down |
| 19005 |
Insufficient memory. Cannot start up the Traffic Center. |
| 19006 |
Too much data being transmitted. Cannot process all the data. |
| 19007 |
Pro-Server is not properly installed. |
| 19008 |
Insufficient memory or memory conflict. Cannot process. |
| 19010 |
Protocol error. Received illegal data. : XXXX |
| 19011 |
Received an unsupported (system) code (XXXX). Cannot process. |
| 19012 |
Received an unsupported command (XXXX). Cannot process. |
| 19013 |
Duplex routing requested:XXXX |
| 19014 |
Data syntax error. |
| 19015 |
Data format version error. |
| 19016 |
Pro-Server version is too old. Cannot perform processing. |
| 19017 |
Cannot decode the data?s encryption. Illegal circuit data. |
| 19018 |
An error has occurred in CGI or the Traffic Center API. |
| 19020 |
Frame reception has been interrupted. |
| 19021 |
Receive Node response has stopped during data transmission. |
| 19022 |
Data communication has been interrupted. |
| 19023 |
The Traffic Center has not started correctly. |
| 19024 |
Traffic Center is busy. |
| 19025 |
The Traffic Center is shut down. |
| 19026 |
No response from the Traffic Center. |
| 19027 |
The Traffic Center has already been started. |
| 19028 |
The Traffic Center has failed to respond within the defined period. |
| 19029 |
The Traffic Center communication line(s) to external devices is/are disconnected and the Traffic Center cannot respond. |
| 19030 |
Pro-Server is shut down. Traffic Center cannot continue processing and will be shut down. |
| 19031 |
An error has occurred during communication with a GP.
(MtoM LAN protocol error) |
| 19032 |
Traffic Center is currently busy. Your request exceeds the Traffic Center?s usage limit license. Unable to process. |
| 19050 |
Invalid routing data - cannot be processed. |
| 19051 |
(XXXX) is not registered as an authorized user. |
| 19052 |
(XXXX) has no usage right(s). |
| code |
message |
| 20001 |
Illegal block abort is detected in segmented PRW files. |
| 20002 |
Code that cannot be analyzed has been detected. |
| 20003 |
Invalid device address in Project File.Invalid device address in Project File. |
| 20004 |
Cannot write to XXXX file. |
| 20005 |
PRW segmented file size is incorrect. |
| 20006 |
PRW segmented file contents are incorrect. |
| 20007 |
Cannot access the designated file XXXX. |
| 20008 |
Cannot process due to insufficient memory. |
| 20009 |
XXXX file is damaged. Cannot read. |
| 20010 |
XXXX file is not a project file. |
| 20011 |
Cannot find the designated PLC protocol table (PLCTBL).Designate the correct Pro-PB folder. |
| 20012 |
Data Transfer settings are not correct. |
| 20013 |
Could not convert the Image File. |
| 20014 |
Could not convert the Alarm Log file data. |
| 20015 |
No Alarm Log file. Cannot create. |
| 20016 |
Designate the "SAVE TO" folder. The Web page will be saved in this folder |
| 20017 |
Illegal/Invalid folder name |
| 20018 |
No valid Web Compiler found in the Web Compiler folder. |
| 20019 |
Designate ?SAVE FROM? Project File correctly. |
| 20020 |
Cannot save setting data. Check the SAVE TO folder. |
| 20021 |
Selected template file is incorrect. Re-enter. |
| 20022 |
GPTypes.ID file does not exist or is corrupted. |
| 20023 |
Designate the Alarm Log data READ TO folder. |
| 20024 |
Network Project File is not designated. Cannot verify the settings. OK to continue processing? |
| 20025 |
Node is not designated. Designate the Network Project File and designate that file's node. |
| 20026 |
Network Project is not designated correctly, or the designated node does not exist in the Network Project. OK to continue processing? |
| 20027 |
OK to continue processing? |
| 20028 |
Illegal CSV file name |
| 20029 |
Network Project File has not been designated. |
| 20030 |
Node has not been designated. Designate the Network Project File and designate that file?s node. |
| 20031 |
Name of HTML output file is not designated. |
| 20032 |
The template file for Alarms is not correct. |
| 20033 |
The designated Node is illegal/does not exist. |
| 20034 |
This is not a Network Project File. |
| 20035 |
The allowed screen size range is from 1 to 1024. |
| 20036 |
The Timeout value can be from 1 to 3000000. |
| 20037 |
XXXX is not ready for data transfer. Perform the datatransfer preparation in GP-PRO/PB III for Windows |
| 20038 |
Cannot find or open XXXX |
| 20039 |
XXXX is not a Project File. Invalid file format. |
| 20040 |
Cannot write to the output file. |
| 20041 |
Error in Project File XXXX.(Error code XXXX) |
| 20042 |
CF Card folder is not yet created inside the Project File. |
| 20043 |
Invalid password. Re-enter the password. |
| 20501 |
Warning!. Unrecognizable substitution mark ($$) in template. XXXX |
| 20502 |
Warning!. Missing substitution end mark ($$) in template. XXXX |
| 20503 |
Warning!. No GP Web applet description in template. Browser cannot display the project. |
| 20504 |
Warning!. Illegal GP Web applet attribute description in template. |
