|
NOTE: |
| To use the Pro-server Ver. 3.12 functions,
2-Way Driver shoud, also, be updated to Ver. 3.02. Click
here to download this file. |
|
| File Name |
Pro-ServerV312.exe |
| Size |
6,183KB |
| Update Version |
3.12 |
| Original Version |
Pro-Server with
Pro-Studio Ver. 3.0, Ver. 3.01, Ver. 3.10, Ver. 3.11 |
| Update Description |
|
1.The following errors were corrected. |
| - |
Sometimes data was not saved under the designated file name. |
|
|
Action feature "Writes Data to Excel Book." |
| - |
When "Append Data" was selected for the data save type, existing log data was overwritten by the newly saved data. |
|
|
Action Feature "Upload of GP Log Data." |
| - |
When Pro-Server Ver. 3.1 is installed, the OPCPRO.EXE application would not run. *1 |
| - |
Action Feature "Send Data via Mail" can create garbage characters. |
| - |
Pro-Studio can be forced to shut down. |
2. The Remote RAS for PL Series is newly supported. |
| - |
The Remote RAS and Remote Shutdown Programs are available for free download. |
|
*1 To prevent this from occurring, please download "OPCServer312.exe". After downloading is completed, differential installation will be performed. Instead of uninstalling the OPC Server, simply perform this installation.
If the OPC Server is not installed on your PC, there is no need to perform this installation.
|
|
| *This applies to users who have performed the Ver. 3.1 or later update. |
|
|
|
Opening the file: (This is a self-extracting file.)
Since this installer only modifies existing Pro-Server code, Pro-Server
Ver. 3.0 does not need to be uninstalled.
Prior to installing the update module, be sure to exit the Pro-Server program.
|
| 1. |
Click on the above file name to download the data to a folder you wish to store. |
| 2. |
After the download is finished, double-click on the file to open it. |
| 3. |
Follow the Installer's instructions to install the update files. |
| 4. |
After installing this module, restart your PC. |
Attention:
While viewing the property of the downloaded update module, and selecting the "Version Tab", the follwing error will be displayed:
"This program has performed an illegal operation and will be shut down."
We have confirmed this problem. Please do not view the "Version Tab" of this updated module.
This problem will not effect the updated module which will correctly install the updated files to your computer. |
|
Update History:
[Ver. 3.11 Update Contents] Last
updated August 10, 2001
| 1. |
The following errors were corrected.
| - |
When the Action feature "Upload of GP Log Data." is used, if the data save format "CSV type" is used and "Add data" is used as the save type, all data uploaded is simply written over the existing Log data. |
|
[Ver. 3.10 Update Contents] Last
updated May 28, 2001
| 1. |
The Cache-Read Function speeds up initial device readout. |
| 2. |
Writing to devices with no cache is also faster. |
| 3. |
Previously unreadable devices are now readable. |
| 4. |
Bit access to GLC 32-bit Devices is now possible. |
| 5. |
The following errors were corrected.
| - |
During saving of CSV data using "Upload of GP Log Data." Action. |
| - |
Excessive time required to save data using "Upload of GP Log Data." Action. |
| - |
No data caused writing to the next Excel sheet during use of "Writes Data to Excel Book." Action. |
|
[Ver. 3.01 Update Contents]
1. Pro-Server's "Upload of GP Log Data." has been modified as follows.
| - |
Editing Pro-Server Ver. 2.0 data will not cause an
error. |
| - |
Uploaded Log data that contains date information will not be overwritten with incorrect data. |
| - |
When a template is used, the data write range no longer needs to be the data item count + 1. |
|
