2Way Driver Ver. 4.52 Update Module

File Name 2WayDriver V452.exe Size 630KB Update Version Ver.4.52 Original Version 2Way Driver Ver.4.51 or earlier Description 1. In rare cases, a " 51:00:00:100E " error may occur and it may become impossible to execute reconnecting process during Network connection processing between PC and GP/GLC. 2. When an indefinite frame is received in "MEMORY LINK Ethernet Type" protocol, in error may occur on the GP/GLC.
Opening the file: (This is a self-extracting file.) This program is for updating the Driver to Ver.4.52. The setup procedure of the program is as follows.
-	Setup Procedure
	This program should be run on a PC on which GP-PRO/PB III C-Package has been installed.
	Do not uninstall GP-PRO/PB III C-Package03. This installer overwrites only the parts to be updated.
	Be sure to close GP-PRO/PB III C-Package03 processes before starting installation.
	The target product of this update program is GP-PRO/PB III C-Package03.
	1.	Click on the above file name to download the data.
	2.	After the download is finished, double-click on the file to open it.
	3.	Follow the Installer's instructions to install the update files.
	4.	When installation is completed normally, " Setup completed." is displayed. If there are any problems and installation can not be completed, contact our company.
-	Note in Setting up the Program
	Once installation is completed, screen data must be transferred to update 2Way Driver for GP/GLC.
Update History: [Ver. 3.01 Update Contents] May 28, 2001 1. The new GP-2501 Series unit is now supported. 2. The following error was corrected. - Data can now be read out from a CF Card via the "Upload GP Log Data" Action. [Ver. 3.01 Update Contents] 1. 32-bit character string processing has been changed. 2. The following error was corrected. - GP setup can now be performed via network (router). (Only GP-2000 Series units)

Last Updated : September 30,2004	| Back | HOME |
Copyright (C) 1996-2004 Digital Electronics Corporation   All rights reserved.