PL-5911T Specifications

	Functional Specifications
	Model PL5911-T11 PL5911-T41-24V CPU Intel(R) ULV Celeron(R) 650MHz DRAM (SDRAM DIMM) Max.512MB (2 DIMM sockets) Supported OS Windows(R)2000/WindowsNT(R)/MS-DOS(R) BIOS First BIOS Secondary Cache 256KB Display Type TFT color LCD Graphics VGA (640 x 480pixels) 32 bit colors Dot Pitch 0.33 x 0.33mm Effective Display Area 211.2W x 158.4H (mm) Display colors 260K colors Backlight CCFL (user replaceable) Touch Panel Type Resistive Film (analog) Resolution 1024 x 1024 Interface COM4 (via mouse emulation software/USB*2) Interface Serial RS-232C (with FIFO) COM1 (Dsub9-pin male) COM2 (Dsub9-pin male) <RI/+5V Switchable>*1 COM3 (Dsub9-pin male) <RI/+5V Switchable>*1 Printer Centronics Standard (ECP/EPP compatible) LPT1 (Dsub25-pin female ) Keyboard/Mouse PS/2 I/F (Mini DIN 6-pin female) Disk I/F FDD Unit Front Access/2 modes/3.5 inch FD E-IDE Side-mount 2.5 inch HDD I/F PL-5911T: 1 slot Rear-mount CD-ROM (1 slot) Ethernet 10 Base-T/100 Base-TX USB Front x 1, Side x 1 RAS Dsub25-pin male ; 2 Input, 2 Output, 1Reset Expansion Slots PCI/ISAx1

	General Specifications
	Model PL5911-T11 PL5911-T41-24V Electrical Input Voltage AC100V DC24V Rated Voltage AC85V to AC132V DC19.2V to DC28.8V Power Consumption 110VA or less 80W or less Allowable Voltage Drop 1 cycle or less 10ms or less Voltage Endurance AC1500V 20mA for up to 1 minute (between charging and FG terminals) AC1000V 20mA for up to 1 minute (between charging and FG terminals) Insulation Resistance 10mohm or higher at DC500V Environmental Ambient Operating Temperature 0°C to 45°C (with HDD attached: 5°C to 45°C) Storage Temperature -10°C to +60°C Ambient Operating Humidity 10 to 85%RH (non-condensing) Storage Humidity 10 to 85%RH (non-condensing) Atmosphere Free of corrosive gasses Vibration Resistance 19.6m/s2 (10Hz to 25Hz in X,Y,Z direction for 30min.) <w/HDD:4.9m/s2><w/FDD:9.8m/s2> Electrostatic Discharge Immunity 4kV IEC61000-4-2 Level3 Structural Grounding 100ohm or less, or your country's applicable standard *1 Rating Equivalent to IP65f (JEM 1030) *2 Certifications - UL-60950 CAN/CSA-C22.2 No. 60950-1-03 CE Marking - EMC directives EN55011 (Group1 ClassA) and EN61000-6-2 External Dimensions *3 311Wx271Hx93D(mm) [12.2Wx10.7Hx3.7D(inch)] Weight 5.5kg or less(12.11lb) *1 Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For further information, please contact your Pro-face distributor. *2 The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation. *3 Excluding projections

	Expansion Slot Specifications
	Expansion slots PL-5911T (1 slots) Power Supply 3.3V 5V 12V -5V -12V Electrical capacity 0.25A 1A 0.5A 0.1A 0.1A

	Dimensions (Units:mm [ in.] )
		Panel Cut-out

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.