LT3000SERIES compact Hardware Specifications
High-speed Counter / Pulse Catch Input Specifications
| Counter | Pulse catch | ||
|---|---|---|---|
| Input *1 | DC24V Open collector | DC24V Open collector |
|
| Single phase (4points) |
Double phase (1point or 2points) |
||
| Input Points | CT0 (IN0) , CT1 (IN2) , CT2 (IN4) , CT3 (IN6) According to user setting |
Use CT0 (IN0) and CT1 (IN2) in pairs , CT0: Phase A, CT1 : phase B Use CT2 (IN4) , CT3 (IN6) in pairs CT2 : Phase A , CT3 : Phase B According to user setting |
IN0 , IN2 , IN4 , IN6 According to user setting |
| Minimum Pulse Width (Pulse Input) |
 |
 |
|
| Count Speed (Rise , Fall Time) |
 |
－ | |
| Phase | 1phase | 90 degree phase differentional 2-phase signal / 1-phase + directional signal |
－ |
| High Speed Count Frequency | 100Kpps | 50Kpps | － |
| Count Edge Designation | Available | Not available | － |
| Count Register | 32-bit UP / DOWN counter | － | |
| Counter Mode Charge | Set through software | － | |
| Upper / Lower Limit Settings | Not available | － | |
| Preload/Prestrobe | Available | － | |
| Marker Input (Clear Counter Value) |
－ | IN3 , IN7 | － |
- *1
- Input / output No. is different by a combination for exclusive specifications.
