Solutions	LT solves a variety of production site problems.

	Example 1 Type A1/A2/B+/H
	Food Processing Equipment - Fryer
	"We want to reduce both the number of components and the wiring around the control panel."
	Problems 1 In-house development of a controller and display device is too expensive. 2 The number of components needs to be reduced, for downsizing of the equipment. 3 Numerous protruding parts cause corrosion and dust problems.
	Solutions 1 Replacing mechanical switches and lamps with a touch display makes it easier to respond to design changes. 2 The all-in-one design reduces costs and risks associated with purchasing separate components. 3 Further costs are saved due to greatly simplified wiring and installation.

	Example 2 Type B/B+
	Food Processing Equipment - Material Charger
	"We want to reduce the number of units with protruding parts, and keep the area around the control panel clean."
	Problems 1 Protruding parts on the control panel lower the level of hygiene because corrosion and mold collect in the crevices. 2 It's easy to make setting mistakes.
	Solutions 1 The display-type control panel is easier to clean and more hygienic. 2 Wiring is reduced, and the system can be installed in a smaller space. 3 Display and control are combined into a single unit.

	Example 3 Type B/B+/C
	Less Wiring, Easier Assembly
	"We want to cut down on the amount of wiring for more efficient maintenance, and to shorten the time needed for setup on-site."
	Problems 1 The setup time needs to be shortened as much as possible. 2 It is important to reduce malfunctions and other problems, caused by miswiring.
	Solutions 1 LT is a 1-box solution that requires less on-site setup because it enables totally distributed control. 2 The LT display eliminates the need for a conventional control panel and reduces the number of components. 3 The Flex Network handles all communications between devices, so there is less wiring between machine blocks.

	Example 4 Type C
	Metal Plating Systems
	"We use a lot of inverters, so settings are time-consuming."
	Problems 1 Parameters for each product need to be changed. 2 Too many wires are needed between inverters. 3 The power supply and torque should be monitored, with an alarm to alert us to problems.
	Solutions 1 There is no parameter unit needed for the inverter. 2 Control can be made with a single communication cable. 3 A real-time trend display of the inverter control protects machinery.

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.