Specifications of PFXGM4B01D
Display Specifications
| Virtual Resolution (pixels) | 320 x 240 (QVGA) | ||
|---|---|---|---|
| Language Fonts *1 | Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable. |
||
| Character sizes | Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts |
||
| Font sizes | Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times. *2 |
||
| 8 x 8 pixels | 40 characters per row x 30 rows | ||
| 8 x 16 pixels | 40 characters per row x 15 rows | ||
| 16 x 16 pixels | 20 characters per row x 15 rows | ||
| 32 x 32 pixels | 10 characters per row x 7 rows | ||
| Application memory | FLASH EPROM 8 MB *3 | ||
| Logic Program Area | FLASH EPROM 132 KB *4 (Equivalent to 15,000 steps) |
||
| Font Area | FLASH EPROM 8 MB (when limit exceeded, uses application memory) |
||
| Data backup | nvSRAM 128 KB *5 | ||
| Clock Accuracy | Uses the clock of an external device *6 | ||
| Touch Panel Type | Resistive Film (analog) | ||
| Touch Panel Service Lifetime | 1,000,000 times or more | ||
| Interface | Serial (COM1) | Asynchronous Transmission: RS-232C/422/485, Data Length: 7 or 8 bit, Stop Bit: 1 or 2 bit, Parity: none, Odd or Even, Data Transmission Speed: 2,400 to 115,200bps, 187,500 bps, Connector: D-Sub9 (plug) |
|
| Ethernet (LAN) | IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
||
| USB (Type A) | USB2.0, Connector: Type A x 1, Power Supply Voltage: DC5V±5％, Maximum Transmission Distance: 3m (9.84 ft.) or less |
||
| USB (mini-B) | USB2.0, Connector: mini-B x 1, Maximum Transmission Distance: 5m (16.40 ft.) or less |
||
- Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
- Other font sizes can be set up with the Editor software.
- Capacity available for user application. The capacity depends on how many fonts you load from Editor software.
- Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1MB.
- Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
- Set up the "Clock Updates" feature with the Editor software. Please refer to the GP-Pro EX reference manual "Common" - "Clock Update Settings" for details.
General Specifications
| Supported Standards and Regulations |
      |
|---|---|
| Rated Input Voltage | 24Vdc |
| Input Voltage Limits | 20.4 to 28.8Vdc |
| Acceptable Voltage Drop | 7ms or less |
| Power Consumption | 1.6W or less |
| In-Rush Current | 30A or less |
| Voltage Endurance | 1,000 Vac 20 mA for 1 min (between charging and FG terminals) |
| Insulation Resistance | 500 Vdc, 10 MΩ or more (between charging and FG terminals) |
Environmental Specifications
| Surrounding Air Temperature | 0 to 50 ℃ (32 to 122 ℉) |
|---|---|
| Storage Temperature | -20 to 60 ℃ (-4 to 140 ℉) |
| Ambient Humidity | 85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉) or less - no condensation.) |
| Storage Humidity | 85 % RH (Wet bulb temperature: 39 ℃ (102.2 ℉) or less - no condensation.) |
| Dust | 0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels) |
| Pollution Degree | For use in Pollution Degree 2 environment |
| Atmosphere | Free of corrosive gases |
| Air Pressure (altitude range) | 800 to 1,114 hPa (2,000 m (6,561 ft) or lower) |
| Vibration Resistance | EN61131-2 compliant 5 to 9 Hz Single amplitude: 3.5 mm (0.14 in.) |
| Shock Resistance | IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z 3directions |
| Electrical fast transient/burst |
IEC61000-4-4 2kV Power port 1kV Signal ports |
| Electrostatic Discharge Immunity | IEC61000-4-2 6kV direct contact 8kV air contact |
Structural Specifications
| Structure | IP20 (NEMA Type 4X not supported) |
|---|---|
| Cooling Method | Natural air circulation |
| Weight | 0.21kg (0.46 lb.) or less |
| Grounding | Functional grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. |
External Dimensions
DIN Rail Attached Demention
