GP2000 Series

GP2601-TC11 Specifications (End of Sale: 2011/02/28)

Functional Specifications

ModelGP2601-TC11
Recommended Substitute
Type TFT Color LCD
Display Colors 256 colors (no blink)/ 64 colors (3-speed blink)
(software control)*1
Backlight CCFL (Service life: 50,000 hrs. at 24hr. operation)
Resolution 800 × 600 pixcels
Effective Display Area (mm) 246.0(W) × 184.5(H)
Brightness Control 4 levels of adjustment available via touch panel
Contrast Adjustment -
Language Character Sets ASCII: (Code page 850) Alphanumeric (incl. European characters)
Chinese: (GB2312-80 codes) simplified Chinese fonts
Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul fonts
Taiwanese: (Big 5 codes) traditional Chinese fonts
Text8 × 8 dots 100 char. × 75 rows
8 × 16 dots 100 char. × 37 rows
16 × 16 dots 50 char. × 37 rows
32 × 32 dots 25 char. × 18 rows
Character Sizes*2 8 × 8 dots, 8 × 16 dots, 16 × 16 dots, 32 × 32 dots
Font Sizes Width can be expanded 1 to 8 times.
Height can be expanded 1/2*3, 1 to 8 times.
Application Memory 4MB FLASH EPROM
Data Backup Memory 128KB - uses lithium battery*4
Touch Panel Resolution 40 × 30 keys/ screen - 1 or 2 point touch
External InterfacesSerial
Interface
Asynchronous Transmission: RS232C/ RS422
Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, Odd or Even
Data Transmission Speed: 2400bps to 115.2kbps, 187.5Kbps*5
CF Card
Interface
1 slot
AUX
Input/Output *6
Remote
Reset
Input
Remote Reset Input: 1 point,
Input Voltage: DC24V ±10%,
Input Current: 4mA (TYP), Min. Input Pulse Width: 2ms
Operating Voltage: (When ON) Min. DC21.1V/ (When OFF) Max. DC3V
Isolation Method: Photocoupler Isolation
Output  Output: 3 Points
(RUN Output: 1 point, System Alarm Output: 1 point, External Buzzer Output: 1 point)
Rated Voltage: DC24V,
Max. Rated Current: 50mA/ point,
Wire Gauge: AWG28 to AWG16
Printer Interface Compatible with NECPC-PR201/PL, EPSON ESC/P24-J84(C), HP Laser Jet, PCL 4 command, EPSON PM/Stylus (6-color ink), EPSON Stylus (4-color ink) compatible printers*7
Tool Connector Asynchronous TTL level nonprocedure command I/F

Used for transferring data between the GP application software and the GP.
Used for data transfer with the 2-Port feature.

Used for a variety of devices, including a bar-code reader.
  1. Changing the "Colors" setting to "256 colors" will disable the blink feature on all your project screens. If you wish to use the blink feature, do not change this setting to "256 colors."
  2. The display font will differ depending on which (language) character set used, or which size you select.
  3. Only available when using "1/2 Byte Character" settings via software. (Only Japanese, Chinese, Taiwanese and Korean characters.)
  4. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is under 40℃
    4.1 years when the battery's ambient temperature is under 50℃
    1.5 years when the battery's ambient temperature is under 60℃
    When used for backup:
    Approximately 60 days, with a fully charged battery
    Approximately 6 days, with a half-charged battery
  5. SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
  6. Using the AUX Input/Output I/F requires the separately sold Screw Lock Terminal Block (GPM-AXCN01).
  7. Printers with only Windows drivers cannot be used. However, certain types of printers with both Windows and DOS drivers can be used. For details, contact your local Pro-face distributor.

General Specifications

ModelGP2601-TC11
Recommended Substitutions
ElectricalRated Voltage AC100V to 240V
Rated Voltage
Range
AC85 to 265V
Power Consumption 50VA or less (AC IN 100V)
85VA or less (AC IN 240V)
Allowable
Voltage Drop
1 cycle or less
(Actual drop must be less than 1 second)
Voltage Endurance AC1500V, 20mA for up to 1 minute
(between charging and FG terminals)
Insulation Resistance 10MΩ or higher at DC500V
(between charging and FG terminals)
EnvironmentalAmbient Operating Temperature*1 0 to 50Ω
Storage Temperature -20 to 60Ω
Ambient Humidity 10 to 90% RH
(non-condensing wetbulb temperature 39℃ or less)
Storage Humidity 10 to 90% RH
(non-condensing wetbulb temperature 39℃ or less)
Vibration Resistance Compatible with IEC61131-2 (JIS B 3502) Compliant
When vibration is NOT continuous:
10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2
When vibration is continuous:
10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2
X, Y, Z directions for 10 times (80min.)
Noise Immunity Noise Voltage: 1500Vp-p
Pulse Duration: 1µs
Rise Time: 1ns
(via noise simulator)
Electrostatic Discharge Immunity 6kV (complies with IEC 61000-4-2 Level 3)
Corrosive Gasses Free of corrosive gasses
StructuralGrounding 100Ω or less, or your country's applicable standard
Ratings Equivalent to IP65f (JEM1030), NEMA#250 TYPE 4X/12*2
External Dimensions 317W × 243H × 58D
Weight 3.5kg (7.7lb) or less
Cooling Method Natural air circulation
  1. When installing the GP in a cabinet or enclosure, the term “ambient operation temperature” indicates the cabinet or enclosure’s internal temperature. The LCD displays may occasionally blur when they are used for hours at over 40℃ ambient operating temperature. This is a temporary phenomenon. After the temperature returns to normal, the display will be restored to normal. The GP's operation will not be affected even though the display is blurred.
  2. The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

Dimensions

GP2601-TC11 Dimensions