Connections

	Connection with a PLC Programless Communication
	Connections with many different types of PLCs throughout the world
	The direct access method supports 76 protocols for PLCs from 25 manufacturers world wide, meeting diverse requirements of customers. * For the supported PLCs, see the table provided on the right. For further details of each PLC, contact your local GP distributor.

	Direct Connection with a PLC Direct Connection with the CPU Programming Port
	System configuration at low costs The supported protocol allows the GP series unit to be connected directly to the CPU programming port. * Applicable PLCs: PLC MELSEC A series/QnA series/FX series of Mitsubishi Electric Corp.
	2-port Adapter II
	This compact adapter allows you to use both the GP series unit and the PLC's peripheral units for the efficient transfer, monitoring, and debugging of a PLC program. - The direct mode can be selected for high-speed communication. - Isolated signals via 2-port Adapter II avoids noise interference to PLC, CPU. * The cables, GP430-IP10-O and GP430-IP11-O, cannot be used with this device. * For further details on each PLC, contact your local GP distributor. * Applicable PLCs: PLC MELSEC A series/QnA series/FX series of Mitsubishi Electric Corp.

- The colors in this page and the PDF catalog may differ from those of the actual unit. - Actual user screens may differ from the screens shown here. - LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects. - All product names used in this page and the PDF catalog are the registered trademarks of their respective companies. - All information contained in this page and the PDF catalog is subject to change without notice. Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.