GP3000 Series Specifications (AGP-3600T)

type:
AGP-3600-T1-AF

type:
AGP-3600-T1-D24

	Memory: 8MB FEPROM
	12.1 inch TFT Color LCD Dispay Resolution: 800 x 600 pixels
	65,536 Colors

Specifications with dotted lines will be supported by the next version of GP-Pro EX.

Functional Specification

		AGP3600-T1-AF	AGP3600-T1-D24
Display Type		TFT Color LCD
Display Colors		65,536 Colors (no blink) / 16,384 Colors (3-speed blink) *1
Backlight		CCFL (Service life: 50,000 hrs. at 25 ^oC and 24 hr. Operation)
Display Resolution		800 x 600 pixels
Effective Display Area		248.0mm [9.76in.] x 186.5mm [7.34in.]
Brightness Control		8 levels of adjustment available via touch panel
Contrast Adjustment		-
Language Fonts		Japanese: 6962 (JIS Standard 1&2)(including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified and traditional Chinese fonts are downloadable.)
Text Composition	Character Sizes	Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 dot fonts Stroke font: 6 to 127 dot fonts (Full-size character: 12 to 254 dot fonts)
	Font Sizes	Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times *2
Text	8 x 8 dots	100 Char. x 75 rows
	8 x 16dots	100 Char. x 37 rows
	16 x 16 dots	50 Char. x 37 rows
	32 x 32 dots	25 Char. x 18 rows
Memory	Application	8MB FEPROM *3
	Data Backup	320KB SRAM *4
Touch Panel	Type	Resistive Film (analog)
	Resolution	1024 x 1024
Interface	Serial Interface (COM1)	Asynchronous Transmission: RS-232C/422/485 *5 Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits Parity: none, Odd or Even Data transmission speed: 2400bps to 115.2kbps Connector: D-Sub 9pin male
	Serial Interface (COM2)	Asynchronous Transmission: RS-422/485 Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits Parity: none, Odd or Even Data transmission speed: 2400bps to 115.2kbps (MPI: 187.5kbps to 12Mbps *6) Connector: D-Sub 9pin female
	Ethernet Interface	IEEE802.3u, 10BASE-T/100BASE-TX modular jack connector (RJ-45)
	USB Interface	USB1.1, USB TYPE-A connectorx 2
	CF Card Interface	CF Card Slot (TYPE-II) x 1
	Sound Output	Speaker Output 70mW (Rated Load: 8Ω, Frequency: 1kHz), Connector: Two piece type terminal block
	AUX Input/Output	[AUX Output] Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, [AUX Input] Remote Reset Input, Input Voltage: DC24V, Input Current: 6mA, Operating Voltage: (When ON) DC9V or more,(When OFF) DC2.5V or less

General Specification

	AGP3600-T1-AF	AGP3600-T1-D24
Rated Voltage	AC100V to AC240V	DC24V
Rated Voltage Range	AC85V to AC265V	DCV19.2 to DC28.8V
Allowable Voltage Drop	1cycle or less (Voltage drop interval must be 1s or more.)	10ms or less
Power Consumption	AC100V 0.9A or less AC240V 0.45A or less	50W or less
Voltage Endurance	AC1500V 20mA for 1 minute (between charging and FG terminals)	AC1000V 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance	10MΩ or higher at DC500V (between charging and FG terminals)
Operating Temperature	0 ^oC to 50 ^oC *7
Storage Temperature	-20 ^oC to +60 ^oC
Humidity	10%RH to 90%RH (Non-condensing, wet bulb temperature: 39 ^oC or less)
Storage Humidity	10%RH to 90%RH (Non-condensing, wet bulb temperature: 39 ^oC or less)
Pollution Degree	Pollution Degree 2
Corrosive Gasses	Free of corrosive gasses
Atmospheric Endurance (GP Operation Altitude)	800hPa to 1114hPa (2000 meters or lower)
Vibration Resistance	IEC61131-2 (JIS B 3502) compliant 5Hz to 9Hz Single amplitude 3.5mm 9Hz to 150Hz Fixed acceleration 9.8m/s2 X,Y,Z directions for 10 times (100min.)
Noise Immunity (via noise simulator)	Noise Voltage: 1500Vp-p Pulse Duration: 1μs Arise Time: 1ns	Noise Voltage: 1000Vp-p Pulse Duration: 1μs Arise Time: 1ns
Electrostatic Discharge Immunity	6kV (complies with EN 61000-4-2 Level 3)
Grounding	100Ω or less, or your country's applicable standard *8
Ratings (For front panel of installed unit)	Equipment to IP65f NEMA #250 TYPE 4X/13 *9
External Dimensions	W313mm [12.31in.] x H239mm [9.41in.] x D56mm [2.20in.]
Weight	3.0kg (6.6lb) or less
Cooling Method	Natural air circulation

*1	Changing the Colors setting to "65,536 colors" will disable the blinking feature on all screens in your project. If you wish to use the blinking feature, select "16,384 colors".
*2	Font Sizes can be set up by software.
*3	User area.
*4	A Lithium battery's lifetime is: 10 years when the battery's ambient temperature is 40 ^oC or less. 4.1 years when the battery's ambient temperature is 50 ^oC or less. 1.5 years when the battery's ambient temperature is 60 ^oC or less. When used for back up: Approximately 60 days, with a fully charged battery. Approximately 6 days, with a half-charged battery.
*5	RS-232C and RS-422/485 are software switchable.
*6	SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
*7	Operating temperature refers to temperature inside mounting enclosure.
*8	Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face office.
*9	The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

External Dimensions, Parts Names

Expand: Click image.

Display

Touch Panel

Status LED
This LED indicates the GP's status, e.g. power input, firmware RUN status or backlight condition.

LED	GP Status
Green (lit)	Normal operation (power is ON.) or OFFLINE operation.
Orange (lit)	Backlight burnout is detected.
Orange (blinking)	During software startup.
Red (lit)	When power is turned ON.
Not lit	Power is OFF.

Expansion Unit Interface 1
Connects expansion units with communication features.

Ethernet Interface (LAN)
The Ethernet transmission interface conforms to IEEE802.3u (10BASE-T/100BASE-TX).
An RJ-45 type modular jack connector (8-pole) is used.
The LED turns on or off to indicate the current status.

LED	GP Status
Green ON	Data transmission available
Green OFF	No connection or subsequent transmission failure
Yellow ON	Data transmission is occurring.
Yellow OFF	No data transmission

USB Interface (Host) (X2)
Conforms to USB1.1. (TYPE-A conn.) Connects a data transfer cable or USB-compatible printer. The maximum communication distance is 5m.

Expansion Unit Interface 2
Connects expansion units with communication features.

VM Unit Interface
This interface is equipped with the unit for extending a display function.

Auxiliary Input/Output /Voice Output Interface (AUX)
This interface is External Reset, Alarm Output, Buzzer Output, and sound output.

CF Card Access LED
This lamp lights up when CF card is inserted and CF card cover is closed.
However if cover is opened while card is being accessed, light will remain lit.

Access Lamp	Indicates
Green ON	The CF Card is inserted and the CF Card Cover is closed. Or, the CF Card is being accessed.
Green OFF	The CF Card is not inserted or is not being accessed.

Power Input Terminal Block
Connect the power cable.

CF Card Cover
The CF Card I/F and Dip Switches are located in the CF Card Cover open.
This cover must be closed when accessing the CF Card.

Serial Interface (COM1)
RS-232C/RS-422/RS-485 serial interface. D-sub 9-pin plug type connector. Communication method is switched via software.

Serial Interface (COM2)
RS-422/RS-485 serial interface. D-sub 9-pin socket type connector.

Catalog PDF

For further information, see the following PDF file.
	GP3000 Series Catalog (Aug. 2008) PDF:9,132KB
If you cannot open PDF files, or do not know how to download the PDF, please click here.

	- All product names used in this page are the registered trademarks of their respective companies. - The unit's photos contained in this page may differ from those of the actual product. - All information in this page is valid as for December, 2005. - All information contained in this page is subject to change without notice.
	Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.