GP3000 Series Specifications (AGP-3302B)

type:
AGP3302-B1-D24

	Memory: 6MB FEPROM
	5.7 inch Blue-mode Monochrome LCD Dispay Resolution: 320 x 240 pixels
	Blue and White (16 Shades)

Functional Specification

		AGP3302-B1-D24
Display Type		Blue-mode Monochrome LCD
Display Colors		Blue and White (16 Shades/ 3-speed blink)
Backlight		CCFL (Service life: 58,000 hrs. at 25 ^oC and 24 hr. Operation)
Dispay Resolution		320 x 240 pixels
Effective Display Area		115.2mm[4.54in.] x 86.4mm[3.40in.]
Brightness Control		8 levels of adjustment available via touch panel
Contrast Adjustment		8 levels of adjustment available via touch panel
Language Fonts		Japanese: 6962 (JIS Standard 1&2)(including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified and traditional Chinese fonts are downloadable.)
Text Composition	Character Sizes	Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 dot fonts Stroke font: 6 to 127 dot fonts (Full-size character: 12 to 254 dot fonts)
Text Composition	Font Sizes	Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times *1
Text	8 x 8 dots	40 Char. x 30 rows
	8 x 16dots	40 Char. x 15 rows
	16 x 16 dots	20 Char. x 15 rows
	32 x 32 dots	10 Char. x 7 rows
Memory	Application	6MB FEPROM *2
Memory	Data Backup	128KB SRAM *3
Touch Panel	Type	Resitive Film (analog)
Touch Panel	Resolution	1024 x 1024
Interface	Serial Interface (COM1)	Asynchronous Transmission: RS-232C Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits Parity: none, Odd or Even Data transmission speed: 2400bps to 115.2kbps Connector: D-Sub 9pin male
	Serial Interface (COM2)	Asynchronous Transmission: RS-422 Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits Parity: none, Odd or Even Data transmission speed: 2400bps to 115.2kbps Connector: D-Sub 9pin male (MPI: 187.5k *4)
	Ethernet Interface	-
	USB Interface	USB1.1 Host I/F, USB TYPE-A connector x 1
	CF Card Interface	-

General Specification

		AGP3302-B1-D24
Rated Voltage		DC24V
Rated Voltage Range		DC19.2V to DC28.8V
Allowable Voltage Drop		10ms or less
Power Consumption		18W or less
Voltage Endurance		AC500V 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance		10MΩ or higher at DC500V (between charging and FG terminals)
Operating Temperature		0 ^oC to 50 ^oC *5
Storage Temperature		-20 ^oC to +60 ^oC
Humidity		10%RH to 90%RH (Non-condensing, wet bulb temperature: 39 ^oC or less)
Storage Humidity		10%RH to 90%RH (Non-condensing, wet bulb temperature: 39 ^oC or less)
Pollution Degree		Pollution Degree 2
Corrosive Gasses		Free of corrosive gasses
Atmospheric Endurance (GP Operation Altitude)		800hPa to 1114hPa (2000 meters or lower)
Vibration Resistance		IEC61131-2 (JIS B 3502) compliant 5Hz to 9Hz Single amplitude 3.5mm 9Hz to 150Hz Fixed acceleration 9.8m/s2 X,Y,Z directions for 10 times (100min.)
Noise Immunity (via noise simulator)		Noise Voltage: 1000Vp-p Pulse Duration: 1μs Arise Time: 1ns
Electrostatic Discharge Immunity		6kV (complies with EN 61000-4-2 Level 3)
Grounding		100Ω or less, or your country's applicable standard *6
Ratings (For front panel of installed unit)		Equipment to IP65f NEMA #250 TYPE 4X/13 *7
External Dimensions		W167.5mm [6.59in.] x H135mm [5.31in.] x D59.5mm [2.34in.]
Weight		1.0kg (2.2lb) or less
Cooling Method		Natural air circulation

*1	Font Sizes can be set up by software.
*2	User area.
*3	A Lithium battery's lifetime is: 10 years when the battery's ambient temperature is 40 ^oC or less. 4.1 years when the battery's ambient temperature is 50 ^oC or less. 1.5 years when the battery's ambient temperature is 60 ^oC or less. When used for back up: Approximately 60 days, with a fully charged battery. Approximately 6 days, with a half-charged battery.
*4	SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
*5	When using AGP-3300S/AGP-3300L/AGP-3301S/AGP-3301L/AGP-3302B in an environment where the temperature becomes or exceeds 40 ^oC for an extended period of time, the screen contrast level may decrease from its original level of brightness. Operating temperature refers to temperature inside mounting enclosure.
*6	Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face office.
*7	The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

External Dimensions, Parts Names

Expand: Click image.

Display

Touch Panel

Status LED
This LED indicates the GP's status, e.g. power input, firmware RUN status or backlight condition.

LED	GP Status
Green (lit)	Normal operation (power is ON.) or OFFLINE operation.
Orange (lit)	Backlight burnout is detected.
Orange (blinking)	During software startup.
Red (lit)	When power is turned ON.
Not lit	Power is OFF.

Expansion Unit Interface 1 (AGP-3302B is not available)
Connects expansion units with communication features.

Ethernet Interface (LAN)(AGP-3300* only)
The Ethernet transmission interface conforms to IEEE802.3u (10BASE-T/100BASE-TX).
An RJ-45 type modular jack connector (8-pole) is used.
The LED turns on or off to indicate the current status.

LED	GP Status
Green ON	Data transmission available
Green OFF	No connection or subsequent transmission failure
Yellow ON	Data transmission is occurring.
Yellow OFF	No data transmission

USB Interface (Host) (X1)
Conforms to USB1.1. (TYPE-A conn.) Connects a data transfer cable or USB-compatible printer. The maximum communication distance is 5m.

Expansion Unit Interface 2
Connects expansion units with communication features.

Auxiliary Input/Output /Voice Output Interface (AUX)
This interface is External Reset, Alarm Output, Buzzer Output, and sound output.

CF Card Access LED (AGP-3302B is not available)
This lamp lights up when CF card is inserted and CF card cover is closed.
However if cover is opened while card is being accessed, light will remain lit.

Access Lamp	Indicates
Green ON	The CF Card is inserted and the CF Card Cover is closed. Or, the CF Card is being accessed.
Green OFF	The CF Card is not inserted or is not being accessed.

CF Card Cover (AGP-3302B is not available)
The CF Card I/F and Dip Switches are located in the CF Card Cover open.
This cover must be closed when accessing the CF Card.

Serial Interface (COM1)
AGP-3300*/ 3301*: RS-232C/RS-422/RS-485 serial interface. D-sub 9-pin plug type connector. Communication method is switched via software.
AGP-3302*: RS-232C serial interface. D-sub 9-pin plug type connector.

Serial Interface (COM2)
AGP-3300*/ 3301*: RS-422/RS-485 serial interface. D-sub 9-pin socket type connector.
AGP-3302*: RS-422 serial interface. D-sub 9-pin plug type connector.

Power Plug Connector
Power cable is connected to this connector.

Catalog PDF

For further information, see the following PDF file.
	GP3000 Series Catalog (Aug. 2008) PDF:9,132KB
If you cannot open PDF files, or do not know how to download the PDF, please click here.

	- All product names used in this page are the registered trademarks of their respective companies. - The unit's photos contained in this page may differ from those of the actual product. - All information in this page is valid as for December, 2005. - All information contained in this page is subject to change without notice.
	Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.