GP-2601T Specifications

	Functional Specifications
	Model GP2601-TC11 Display Type TFT Color LCD Colors 256 (no blink)/ 64 (3-speed blink) *1 Backlight User replaceable CCFL (Service life: 50,000 hrs. at 25°C and 24hr. operation) Resolution 800 x 600 pixels Effective Display Area (mm) 246.0 (W) x 184.5 (H) Brightness Control 4 levels of adjustment available via touch panel Language Character Sets ASCII: (Code page 850) Alphanumeric (incl. Eur. characters) Chinese: (GB2312-80 codes) simplified Chinese fonts Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2) Korean: (KSC5601 - 1992 codes) Hangul fonts Taiwanese: (Big 5 codes) traditional Chinese fonts Text 8 x 8 dots 100 char. x 75 rows 8 x 16 dots 100 char. x 37 rows 16 x 16 dots 50 char. x 37 rows 32 x 32 dots 25 char. x 18 rows Character Sizes *2 8X8, 8X16, 16X16 and 32X32 dot fonts Font Sizes Height can be expanded 1 to 8 times. Width can be expanded 1/2 *3, 1 to 8 times. Memory Application 4MB FLASH EPROM Data Backup 128KB - uses lithium battery External Interfaces Serial Interface Asynchronous Transmission : RS232C/RS422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400 to 115.2kbps Tool Connector Asynchronous TTL level nonprocedural command I/F <During screen file development> Used for transferring data to and from the GP application software and the GP. Used for data transfer with the 2-Port feature. <During Operation> Used for a variety of devices, including a bar-code reader. CF Card Interface 1 slot (Compact FLASH) Printer Interface Compatible with NEC PC-PR201/PL, EPSON ESC/P24-J84(C), HP Laser Jet PCL 4 command compatible printers *4 AUX Input/Output *5 Remote Reset Input : 1 point   Input Voltage : DC24V +10%   Input Current : 4mA (TYP)   Min. Input Pulse Width : 2ms   Operating Voltage : (When ON) Min. DC21.1V                                   (When OFF) Max. DC3V   Isolation Method : Photocoupler Isolation   Output - 3 Points (RUN Output - 1 point, System Alarm Output - 1 point,                               External Buzzer Output - 1 point)   Rated Voltage : DC24VMax.   Rated Current : 50mA/point   Wire Gauge: AWG28 to AWG16 *1 Changing the "Colors" setting to "256 colors" will disable the blink feature on all your project screens. If you wish to use the blink feature, do not change this setting to "256 colors." *2 The display font will differ depending on which (language) character set used, or which size you select. *3 Only available when using the Japanese character set. *4 Printers with only Windows drivers cannot be used. However, certain types of printers with both Windows and DOS drivers can be used. For details, contact your local Pro-face distributor. *5 Using the AUX Input/Output I/F requires the separately sold Screw Lock Terminal Block.

	General Specifications
	Model GP2601-TC11 Electrical Rated Voltage AC100V to AC240V *1 Rated Voltage Range AC85V to AC265V *1 Power Consumption 50VA or less (AC IN 100V) *1 85VA or less (AC IN 240V) *1 Allowable Voltage Drop 20ms or less Voltage Endurance AC1500V, 20mA for up to 1 minute (between charging and FG terminals) Insulation Resistance 10Mohm or higher at DC500V (between charging and FG terminals) Environmental Ambient Operating Temperature 0°C to +50°C *2 Storage Temperature -20°C to +60°C Ambient Humidity 10%RH to 90%RH (non-condensing, wet bulb temperature: 39°C or less) Vibration Resistance Compatible with IEC61131-2 When vibration is NOT continuous: 10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2 When vibration is continuous: 10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2 X, Y, Z directions for 10 times (80min.) Noise Immunity (via noise simulator) Noise Voltage: 1500Vp-p Pulse Duration: 1 µs Arise Time: 1ns Dust 0.1mg/m3 or less (non-conductive levels) Corrosive Gasses Free of corrosive gasses Structural Grounding 100ohm or less, or your country's applicable standard *3 Ratings (For front panel of installed unit) Equivalent to IP65f (JEM 1030) / NEMA #250 TYPE 4 x/ 12 *4 Weight 3.5kg (7.7lb) or less Cooling Method Natural air circulation External Dimensions W317mm [12.48in.] x H243mm [9.57in.] x D58mm [2.28in.] Panel Cut-out Dimensions 301(+1 / 0)mm [11.85(+0.04 / -0)in.] x 227.5(+1 / 0)mm [8.96(+0.04 / -0)in.] (Panel thickness: 1.6mm [0.06in.] to 10mm [0.40in.]) *1 All GP units marked Revision "3" is marked conform to UL/c-UL  standard requirements. *2 When using GP-2601T in an environment where the temperature becomes or exceeds 40°C for an extended period of time, the screen contrast level may decrease from its original level of brightness.  *3 Grounding rquirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face distributor. *4 The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

	Dimensions (Units:mm [ in.] )

- The colors in this page and the PDF catalog may differ from those of the actual unit. - Actual user screens may differ from the screens shown here. - LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects. - All product names used in this page and the PDF catalog are the registered trademarks of their respective companies. - All information contained in this page and the PDF catalog is subject to change without notice. Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.