GP-2301T Specifications

	Functional Specifications
	Model GP2301-TC41-24V Display Type TFT Color LCD Colors 256 (no blink)/ 64 (3-speed blink) *1 Backlight CFL (Service life: 50,000hrs, at 25°C and 24hr. operation) Resolution 320 x 240 pixels Effective Display Area (mm) 115.2(W) x 86.4 (H) Brightness Control 4 levels of adjustment available via touch panel Language Character Sets ASCII: (Code page 850) Alphanumeric (incl. European characters) Chinese: (GB2312-80 codes) simplified Chinese fonts Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2) Korean: (KSC5601 - 1992 codes) Hangul fonts Taiwanese: (Big 5 codes) traditional Chinese fonts Text 8 x 8 dots 40 char. x 30 rows 8 x 16 dots 40 char. x 15 rows 16 x 16 dots 20 char. x 15 rows 32 x 32 dots 10 char. x 7 rows Character Sizes *2 8X8, 8X16, 16X16 and 32X32 dot fonts Font Sizes Height can be expanded 1 to 8 times. Width can be expanded 1/2 *3, 1 to 8 times. Memory Application 1MB FLASH EPROM Data Backup 128KB SRAM - uses lithuim battery External Interfaces Serial Interface (COM1) Asynchronous Transmission : RS232C/RS422 Data Length: 7 or 8 Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400 to 115.2kbps Tool Connector Asynchronous TTL level nonprocedure command I/F <During Screen File Development> Used for transferring data between the GP application software and the GP. Used for data transfer with the 2-Port feature. <During Operation> Used for a variety of devices, including a bar-code reader. CF Card Interface 1 slot (CompactFlashTM) *1 Changing the “Colors” setting to “256 colors” will disable the blink feature on all of your project’s screens. If you wish to use the blink feature, select “64 colors”. *2 The display font will differ depending on which (language) character set used, or which size you select. *3 Only available when using the Japanese character set.

	General Specifications
	Model GP2301-TC41-24V Electrical Rated Voltage DC24V Rated Voltage Range DC19.2V to DC28.8V Power Consumption 22W or less In-Rush Current 30A or less Allowable Voltage Drop 10ms or less Voltage Endurance AC1000V, 20mA for up to 1minute (between charging and FG terminals) Insulation Resistance 20Mohm or higher at DC500V (between charging and FG terminals) Environmental Ambient Operating Temperature 0°C to +50°C *1 Storage Temperature -20°C to +60°C Ambient Humidity 10%RH to 90% RH (non-condensing, wet bulb temperature: 39°C) Vibration Resistance IEC61131-2 compliant When vibration is NOT continuous: 10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2 When vibration is continuous: 10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2 X,Y,Z dirctions for 10 times (80min.) Noise Immunity (via noise simulator) Noise Voltage: 1000Vp-p Pluse Duration: 1 µs Arise Time: 1ns Dust 0.1mg/m3 or less (non-conductive levels) Corrosive Gasses Free of corrosive gasses Electrostatic Discharge Immunity 6kV (complies with EN 61000-4-2 Level 3) Structural Grounding 100ohm or less, or your country's applicable standard *2 Ratings (For front panel of installed unit) Equivalent to IP65f (JEM1030) / NEMA #250 TYPE 4x/12 *3 Weight 1.2kg (2.6lb) or less Cooling Method Natural air circulation External Dimensions W171mm[6.73in.] x 138mm[5.43in.] x D60mm[2.36in.] Panel Cut-out Dimensions 156(+1 / -0)mm [6.14in.] x 123.5(+1 / -0)mm [4.86in.] (Panel thickness: 1.6mm[0.06in.] to 5mm[0.2in.]) *1 The LCD displays of GP-2300L, GP-2301L and GP-2301S may occasionally blur when they are used for hours at over 400C ambient operating temperature. This is a temporal phenomenon. After the temperature returns to normal, the normal display will be restored. The GP’s operation will not be affected even though the display is blurred. *2 Grounding rquirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face distributor. *3 The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

	Dimensions (Units:mm [ in.] )

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.