 |
Functional Specifications |
|
|
|
| Item |
GLC100-SC41-24V |
| Display |
Type |
STN color LCD |
| Colors |
8 (white, red, blue, green, yellow, purple, light blue, black)
Intermediatecolors are displayed via tiling. |
| Backlight |
CCFL
(under normal temperaturesand humidity,litespan =20.000 hours)
User replaceable. |
| Resolution |
320 x 240 pixels |
Nominal Display
Area |
115.2mm (W) x 86.4mm (H)
(4.54 (W) x 3.40 (H) inch) |
| Attributes |
Blink, Reverse video |
| Brightness Control |
2 levels (via Touch Panel) |
| Contrast Control |
8 levels (via Touch Panel) |
| Language Fonts |
ASCII, Chinese, Korean,
Japanese, Taiwanese |
| Characters |
8 x 8 dots: 40 char. x 30 rows,
8 x 16 dots: 40 char. x 15 rows,
16 x 16 dots: 20 char. x 15 rows,
32 x 32 dots: 10 char. x 7 rows. |
| Font Sizes |
Fonts enlarge in multiples of 1, 2, 4, & 8 (at 4x and 8x) |
| Memory |
Application Memory |
1MB FLASH EPROM
(Approx. 320 screens at 3.2K / screen) |
| Data Backup |
128KB SRAM
(Approx. 32KB allocated to variables) (Lithium battery backup) *1 |
| Touch Panel |
Resistive Film
(32 x 24/1Keys - 1 or 2 point touch) |
External
Interfaces |
Serial |
Asynchronous method: RS232C / RS-422
Data length: 7 or 8 bits,
Stop bits: 1 or 2 bits,
Parity:none / even/ odd
Transmission rate: 2,400 bps to 38,400bps |
| Tool Connector |
Asynchronous TTL level non-procedural command interface
During development: used for transferring application data
During RUN mode: used for bar-code reader interface |
| *1 |
A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is under 40°C
4.1 years when the battery's ambient temperature is under 50°C
1.5 years when the battery's ambient temperature is under 60°C
When used for backup:
Approximately 60 days, with a fully charged battery Approximately 6 days, with a falf-charged battery |
|
|
General Specifications |
|
|
|
| Item |
GLC100-SC41-24V |
| Electrical |
Rated Voltage |
DC20.4 V to DC27.6V DC24V |
| Power Consumption |
20W or less |
| Voltage Endurance |
AC1000V - 10mA, 1min
(between charging and FG terminals) |
| Insulation Resistance |
Min. 20Mohm at DC500V
(between charging and FG terminals) |
| Environmental |
Ambient Operating
Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to 60°C |
| Storage Humidity |
20% to 85% RH (no condensation) |
| Vibration Resistance |
2G (10Hz to 25Hz in X, Y, Z directions for 30min) |
Noise Immunity
(via noise simulator) |
Noise Voltage: 1000Vp-p
Pulse Width: 1µs
Arise Tim: 1ns |
| Atmosphere |
Free of corrosive gas |
Rating
(limited to front
face after installation
in a panel) |
Equivalent to IP65f (JEM 1030) *1
and NEMA #250 TYPE4X/12 |
| Structural |
External Dimensions |
171mm (W) x 138mm (H) x 57mm (D)
(6.73 (W) x 5.43 (H) x 2.24 (D) inch)
(GLC main unit only) |
| Weight |
Max. 0.9kg (2.0lb) (GLC main unit only) |
| Cooling System |
Natural air circulation |
| *1 |
Specified products are equivalent to IP65f ; however,
this does not guarantee operation in all possible environments.
Confirm IP65f rating requirements prior to installation. |
|
|
Dimensions (Units:mm [ in.] ) |
|
|
|
 |
|
 |
|
Supported Protocols |
|
|
|
| PLC |
|
|
Series Name |
| Memory Link Method |
Via standard serial I/F |
| Mitsubishi |
MELSEC AnA Series |
| MELSEC QnA Series |
| Omron |
SYSMAC C Series |
| Toyoda Machinery |
TOYOPUC PC2J |
| Yokogawa |
FACTORY ACE FA-M3 |
| FACTORY ACE FA500 |
| Modicon |
Modbus |
| Multi-Link |
n:1 |
Memory Link
Method |
Via standard serial I/F |
| Mitsubishi |
MELSEC AnA Series |
| Omron |
SYSMAC C Series |
| 1:n |
Toyoda
Machinery |
TOYOPUC PC2J |
| Yokogawa |
FACTORY ACE FA-M3 |
| FACTORY ACE FA500 |
|
Temp Controllers |
|
|
Series Name |
| RKC |
CB Series |
| SR-Mini |
| Yokogawa |
UT Series |
| Yamatake |
SDC |
| Omron * |
N Series |
* Please contact your Pro-face distributor for the driver. |
 |
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly. |
|
|
|
|
|
