Specifications

	General Specifications
	FGW-SE41-24V Electrical Rated Voltage (Rated Voltage Range) DC24V (DC19.2V to DC28.8V) Allowable Voltage Interruption 10ms or less Power Consumption 10W or less In-rush Current 30A or less Voltage Endurance AC 500V, 20mA for up to 1 minute (between charging and FG terminals) Insulation Resistance 10Mohm or more at DC500V (between charging and FG terminals) Environment Operating Temperature/Storage Temperature 0°C to 55°C / -20°C to +60°C Humidity / Storage Humidity 10%RH to 90%RH (non-condensing, wet bulb temperature: 39°C or less) Air Purity (Dust) 0.1 mg/m3 or less (non-conductive levels) Corrosive Gasses Free of corrosive gasses Atmospheric Pressure 800 hpa to 1114 hpa (2000 meters or lower) Vibration Endurance IEC61131-2(JIS B 3501)Compliant When vibration is NOT continuous:10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s When vibration is continuous:10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s X, Y, Z directions for 10 times (80min.) Shock Resistance IEC61131-2 (JIS B 3501) Compliant 147m/s, X, Y, Z directions for 3 times Noise Immunity (via noise simulator) Noise Voltage: 1200Vp-p Pulse Duration: 1µs Rise Time: 1ns Structual Electrostatic Discharge Immunity 6kV (IEC 61000-4-2 Level 3) Grounding 100 ohm or less, or your country's applicable standard* Cooling Method Natural air circulation Installation DIN rail mount Certifications EN55011 class A, EN61000-6-2, UL508, CAN/CSA-C22.2 No.1010 Weight 0.6kg [1.3lb.] or less (main unit only) External Dimensions W37[1.46] x H131[5.16] x D105[4.13] mm[in.] (excluding projections) *1 Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For further information, please contact your Pro-face distributor.

	Functional Specifications
	FGW-SE41-24V Serial Interface Asynchronous Transmission Method: RS-232C / RS-422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400bps to 187.5kbps Ethernet Interface IEEE802.3 (10Base-T) Tool Connector Asynchronous TTL level nonprocedural command interface * For device connection information, refer to the PDF version of the Device/PLC Connection manual.

	External Dimensions

	Accessories
	Item Model No. Description Data Transfer Cable GPW-CB02 Connects the Factory Gateway to a PC, and transfer screen and other data. Can also be used for Factory Gateway unit's internal 2-port feature. (when using GP-Viewer.) RS-232C Cable GP410-IS00-O Interface cables for communication between PLCs or other external devices and the Factory Gateway. RS-422 Cable GP230-IS11-O RS-422 Connector Terminal Block GP070-CN10-O Converts the SIO I/F to RS-422 terminal block. Mitsubishi PLC A Series Programming Port I/F Cable GP430-IP10-O Connects directly to the programming port I/F of Mitsubishi PLC. (Factory Gateway cannot be used simultaneously with the programming console.) Mitsubishi PLC FX Series Programming Port I/F Cable GP430-IP11-O 2-port Adapter II for the Mitsubishi PLC A, QnA, FX Series GP070-MD11 I/F unit for simultaneous use of Mitsubishi PLC A,QnA, FX series peripheral equipment. RS-422 cable for the 2-port Adapter II GP070-MDCB11 Connects the 2-port Adapter II and Factory Gateway. Connector Covers PS-BH00 Side panel connector covers(3).

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.