Contact us
Back to Top
 ROBO Cylinder Connection

You can connect one ROBO Cylinder or more using the MODBUS SIO master driver for GP3000 Series.

Applicable Models: IAI ROBO Cylinder
ROBO Cylinder Position Controller
RPC2 Series PCON
RCS2 Series SCON
ERC2 Series -

To view IAI Corporation's website, click here.

  * You can operate the basic operations of ROBO Cylinder, such as Jog Operation, Homing, Error Reset, etc.
  * You can check states of ROBO Cylinder, such as the current position and the current speed, on the touch panel.
  * You can set and edit the position table information on the touch panel.
  * You can check the states of input and output ports.
  * You can check the history of triggered alarms on the touch panel.
  * You can check the descriptions of alarm codes on the touch panel.
  * You can check the states of multiple ROBO Cylinders at a time.
  * There are some items that cannot be set on the touch panel (MODBUS communication). To set up ROBO Cylinder, the PC software or Teaching Pendant produced by IAI is required.
(e.g.) Communication Speed, In-position Band, etc.

* GP-Pro EX Ver. 1.10 or higher is required.
* GP3000 Series support this functionality.

Download the sample program file and detailed description (PDF file).

Download this sample application!
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.