Otasuke Pro! Technical Resource > Otasuke FAQ's Book

Version & upgrade information

Notes for product upgrades

Newer Product
[PL-5700 Series --> PL-5900 Series]

- Cutout panel dimensions

Identical

- Hardware restrictions

ISA (16 bit access) board is not available.	DAX-IET02 (LAN card) --> Use on-board LAN.
	Sound card --> Must have PCI-BUS specs.
	SCSI card --> Must have PCI-BUS specs
Is HDD unit available?	Not possible because shape of unit is different.
Can FDD unit be used?	Not possible because form of connection is different.
In case of FlashROM Disk (PL-DFR**)	Flash File Disk (PL-FF210) is supported.
In case of FlashROM Disk (PL-DFR**)	CF card unit (PL-CF200) is supported.
Other Issues	Expansion slot insertion direction is different.
	Keyboard mouse interface direction is different.
	Power Switch position is different.
	Touch panel is bigger than a screen size: outside of display area may activate touch as well.

- DOS

Application cannot turn PL-5900 backlight ON/OFF.	Get INT5F.COM permanently stationed.
Touch cannot function after turning OFF Backlight	Execute the following command BLSET PDN After completion, even if Backlight is turned OFF, Touch can function.
Are Windows^®3.1 and WindowsNT^®3.51 supported?	These are not support due to touch driver.

- Windows

Can the HDD unit used for PL-5700 be used?

Chipset is different, and appropriate drivers are different, so it cannot be used.