Otasuke Pro! > Compatibility Information > GP3000

		ST-401	GP-3200A
Display Type		Monochrome LCD	Monochrome Amber/Red LCD
Brightness Control		2 levels in monochrome 8 levels in monochrome	8 levels in monochrome
Display Resolution		QVGA (320 × 240)	QVGA (320 × 240)
Panel Cutout (mm)		118.5(W) × 92.5(H)	118.5(W) × 92.5(H)
Dimensions		103(W) × 104(H) × 41(D)	103(W) × 104(H) × 40(D)
Touch Panel Type		Matrix Type	Resistive Film (Analog) Type
Serial I/F	COM	DSub9P (male) RS-232C	D-Sub9P(male) RS-232C/RS422/RS485
Memory	Application	640KB	6MB
Memory	SRAM	96KB	320KB
Ethernet I/F		10BASE-T	10BASE-T 100BASE-TX
USB I/F		-	USB TYPE-A ×1

* Please read.

1) Touch Panel Specifications

"Analog Type" is adopted for GP-3200T.
With "Analog Type", touch input is not recognized even if you touch two points at the same time. Therefore, please do not touch two points at the same time.
If you use two point touch input with ST-401, we recommend you to change to one point touch input in the application by using the delay feature of the switch functions.

2) Transfer Screen Data

With GP-3200T, USB or Ethernet is used to transfer the screen data. Please use a transfer cable (model: CA3-USBCB-01) for GP3000 Series. Please note that commercial USB cables cannot be used.
Although the tool port is used to transfer the screen data with ST-401, the model of the transfer cable (*1) for ST is different from that of GP-3200T.

*1: ST-401 Transfer cable model: GPW-CB02, GPW-CB03, GP430-CU02-M, etc....

3) Power Consumption

The power consumption of GP-3200T and that of ST-401 are different. Please confirm the power supply capacity that is supplied to the main body.

4) Function Switch

GP-3200T does not have any function switches. Therefore, the function switches that have been set with ST-401 cannot be converted.

FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use