| |
| Out of memory |
|
 |
| |
When screen data exceeding GP's screen memory volume（*1） are transferred, this message appears.
For example, when screen data with 2.5 mega are transferred to GP with 2 mega of screen memory volume, this message appears. |
Check the following contents. |
|
|
Click the project manager's [Project]->[Properties] and there, check [Size of Screen To Be Sent To GP].
→How to confirm a screen size Here |
|
When the total screen size is over GP's screen memory volume, |
→ To Countermeasure1 |
| When the total screen size is not over GP's screen memory volume, |
→ To Countermeasure2 |
|
Countermeasure |
|
|
Countermeasure1
Reduce screen data's volume in the following ways.
| ・ |
Delete as many unnecessary screens as possible. |
| ・ |
When using the same object many times, use Load Screen Feature. |
| ・ |
When using a bitmap, compress the bitmap file. |
| ・ |
Uncheck [Upload Info].
However, data cannot be received from GP later. Be sure to back up the data. |
|
Countermeasure2
In GP, initialize memory（*3） and execute Rebuild（Tool to optimize a screen） of the screen data and then transfer the screen again. |
*1 What's screen memory volume?
It's screen data volume possible to be sent to GP.
| Ex） |
GP2500, GP2600・・・ |
4 mega |
|
GP2300, GP577R・・・ |
2 mega |
*2 What's the difference between [With Upload Info] and [Without Upload Infor]?
Upload Information is information necessary to receive screen data from GP.
Screen data cannot be received from GP to which upload information has not been transferred.
Select [Transfer]->[Setup]->[Transfer Settings]. There, check the checkbox of [Upload Information] and transfer a screen. Then the upload information will be transferred.
*3 How to initialize memory
From GP's OFFLINE, select [INITIALIZE]->[INITIALIZE GP MEMORY].
For the password, enter [1101] at default. |
Return to Top
Back