Products
Download
Contact us
Back to Top
FAQ
 FP3000 series operation-tested models


Built-in computers and software that can be used with the FP3000 series are as follows:
IMPORTANT
- If the specifications of each connected device or display unit have changed, it may not perform correctly.
- We do not warrant the operation of the operation-tested devices on the list.
- Information of the operation-tested devices on the lists is as of March 25, 2009.


Display-tested devices

Type Maker Model OS Interface Tested models
FP-3500T FP-3600T FP-3650T FP-3710T
FP-3710K
FP-3900T
Built-in Computer

Digital Electronics

PS-2000B Windows® 2000 Analog RGB *1
DVI-D *1
Windows® XP Analog RGB *1
DVI-D *1
PS-300XB

Windows® 2000

Analog RGB *1
Windows® XP(XPE) Analog RGB *1
PL-3000B Windows® 2000 Analog RGB *1
DVI-D *1
Windows® XP(XPE) Analog RGB *1
DVI-D *1
[○] Confirmed / [×] Unconfirmed / [-] Untested

NOTE
- This test is conducted to check if the booting screen (including the setup screen of BIOS) and the Windows desktop screen are displayed.
- The desktop screen is tested in all the available modes listed in the screen's Properties dialog box.
For the "Available Number of Dots (pixels) Displayed," see the product specifications page of the FP3000 series. To jump to each product specifications page, click the FP3000 series model name in the list.
*1 Set "640 by 480, 60 Hertz" in the screen's Properties dialog box. Otherwise a message "Out of Range" is displayed.
- If you connect an extended device or distributor between the built-in computer and the FP unit, display performance is not guaranteed.
- To connect an FP unit with a computer other than above, be sure to check performances before you purchase an FP unit. For trial units, contact the nearest Pro-face office or your local distributor.


Touch operation-tested driver

Type Manufacturer Model
(Version)
OS Interface Tested models
FP-3500T FP-3600T FP-3650T FP-3710T
FP-3710K
FP-3900T
Mouse Emulation Software

DMC

UPDD
(03.08.46P)

Windows® 2000 RS-232C
USB *2
Windows® XP(XPE) RS-232C
USB *2
[○] Confirmed / [×] Unconfirmed / [-] Untested

NOTE
- If you use a driver version other than above, the performance is not guaranteed.
- If you consider using a driver version other than above, consult the nearest Pro-face office or your local distributor.
- The operation is tested after calibrated using the mouse emulation software. The mouse emulation software performs 4-point calibration.
*2 The mouse emulation software performs 9-point calibration.
- Mouse Emulation Software can be downloaded from the following page on "Otasuke Pro!"
Mouse Emulation Software


Key switches/pointing device-tested devices (Keypad model)

Type Maker Model
(Version)
OS Interface Tested models
FP-3710K
Built-in Computer

Digital Electronics

PS-2000B

Windows® 2000 USB
Windows® XP USB
PL-3000B Windows® 2000 USB
Windows® XP(XPE) USB
[○] Confirmed / [×] Unconfirmed / [-] Untested

NOTE
- The operation of key switches is tested based on that of a US keyboard.


Back to page top Return to the previous page
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.