1.5.13.1 For Those Using the SP5000 Series

The following are the features and precautions for the SP5000 series.

• NVRAM is used as a backup memory. Please regard all instances of "SRAM" in this document as "NVRAM".

• The features that can be used in the Premium Display and the Advanced Display are different. If you are replacing the display module, make sure to check the differences in features first.
  1.5.13.2 SP5000 Series

• Set the IP addresses for LAN1 and LAN2 with different network segments. If you set an IP address with the same network segment in the display unit, the communication may not work properly.

• When the Operation Lock feature is used while connecting with Ethernet Multilink or GP-Viewer EX, one of the multiple Ethernet settings the SP5000 series have will be displayed as the IP address of the location of the Operation Lock. Therefore, the IP address displayed may differ from that of the LAN port currently connected.

• When changing from a non-SP5000 series model to a SP5000 series model, or when changing between SP5000 series models, see the following.
  5.6.1 Restrictions on Changing Models

• If you display the system menu or Brightness/Contrast Control Bar in offline mode, updates to time display or other displays will be suspended temporarily.

About the System Card

In the SP5000 series, the system card contains information required to operate the display unit, such as system settings and project files for the display unit. If a SP5000 series box module breaks, you can just insert the system card you were using in another box module of the same type, making recovery quick.

• When replacing the system card, Digital Electronics-made SD cards (1GB) (Type: PFXZCDSD1GC61) shall be used.

• For the backup of SD cards to be used as the system card, please refer to Pro-face Support Site "Otasuke Pro!"

• We recommend that you set a password to prevent any unauthorized use of the system card data in other box modules.
  23.10.1.1 Password Settings