34.11.1 Operating Systems that support Transfer Tool

The installation requirements when installing only the Transfer Tool is as follows.

PC

Windows® PC/AT compatible machine

Operating system

  • Windows 8

All editions for 32/64 bit versions

  • Windows 7

All editions for 32/64 bit versions

  • Windows Vista

All editions of 32-bit versions

  • Windows XP

All editions for 32 bit version

  • Windows 2000

(Service Pack 3 or later)

Other programs

  • .NET Framework Ver.2.0*2

  • Internet Explorer Version 6.0 or later

Memory

  • Windows 8, Windows 7, Windows Vista

1 GB or more (2 GB or more is recommended)

  • Windows XP, Windows 2000

128 MB or more (512 MB or more is recommended)

CPU

  • Windows 8, Windows 7, Windows Vista

Pentium IV 1GHz or faster

  • Windows XP, Windows 2000

Pentium II 266 MHz or faster is recommended

Hard disk space*1

340 MB or more

Language

  • Software Menu Interface Display Language

English, Japanese

Required equipment

  • Mouse (compatible with the above operating systems)

Required.

  • DVD drive

Use during installation.

  • USB port and USB cable*3, USB storage

Required when transferring data using USB cables or using the USB storage (Memory Loader).

  • LAN port and LAN cable

Required when transferring data via Ethernet. Hub may be required depending on your computer and network card.

  • CF Card drive and Pro-face CF Card (sold separately)*4

A CF Card reader and a PCMCIA conversion card are required when transferring data (Memory Loader) using a CF Card.

  • SD Card drive, and a SD Card compliant to SD or SDHC standards

Required when transferring data (Memory Loader) using an SD Card.

  • Windows-compatiable modem that can establish telephone communication*5

Required when transferring data via modem. Must support AT commands.

*1 Free space required for installation.

*2 Automatically installed on your computer if .NET Framework 2.0 or later is not already installed. For disk space requirements, visit the Microsoft website.

*3 Supported USB cables differ depending on the display unit model.
34.2 Transferring Project Files via USB Transfer Cable

*4 If you use commercially available CF Cards, we cannot guarantee the operation.

*5 Modems that need to be connected to the center cannot be used.