If the path has more than 200 single-byte characters in the folder where WinGP is installed, when starting simulation an error appears (Cannot start because the installation folder exceeds 200 characters) and it will not operate properly. Use a path less than 200 single-byte characters and reinstall WinGP.
If you install WinGP on an OS that does not support it, an error message appears and the installation cannot be completed.
To install, log on with an account with Windows Administrator authority.
You cannot install WinGP more than once, even to another folder. To uninstall, insert the installation CD in the IPC on which WinGP is installed.
WinGP does not allow for recovery installation. To recover, uninstall and then reinstall WinGP.
If downloading WinGP to a PC/AT compatible machine, please connect the USB key after installation is complete. If the USB key is connected before installation, the operating system starts the USB driver wizard automatically. If the wizard starts, make sure you cancel and exit the wizard.
When installing WinGP on an IPC or PC/AT compatible machine with either Pro-Server with Pro-Studio for Windows or Pro-Server EX installed, you may not be able to install WinGP, depending on the installation conditions, outlined below.
When you install Pro-Server with Pro-Studio for Windows or Pro-Server EX on an IPC or PC/AT compatible machine with WinGP installed, WinGP may not operate properly.
After installation, please restart before using WinGP and log in with an account with Administrator rights. The WinGP will not operate properly without restarting the IPC.