Window Type
Select the display operation for the Image Unit window.
Always On
Always displays the Image Unit window.
ON/OFF Display
Displays/hides the window in [Window Display Bit Address].
Indirect
Use the four consecutive words from the defined [Window Display Word Address] to control which Image Unit Window number to display and to show or hide the display.
After storing the display position and the Image Unit Window number you want to view, turn ON bit 0 in the control address to enable the display.
Video Number
Specifies the number of the Image Unit window to display when the [Window Type] is set to [Always On] or [ON/OFF Display]. The setting range is from 0 to 512.
Window Display Bit Address
When the [Window Type] is set to [Always ON] or [ON/OFF Display], you can specify the video module using thumbnails, or specify the video window from a list.
Video List
When the [Window Type] is set to [Always ON] or [ON/OFF Display], you can specify the Image Unit Window using thumbnails. Or you can specify the video window from a list.
Window Interchange
[Move to Top], [No Action], or [Always On Top]. Available when [Window Type] is set to [Always On] or [ON/OFF Display].
Window display word address
When you select [Indirect] under [Video Layout], you can specify the displayed Image Unit Window number and display position and control the display/erase of the address.
Data Type
When you select [Indirect] under [Video Layout], you can specify the data type of value stored in [Window display word address] from [Bin] or [BCD].