Check if your system is compatible with the Pass-Through Configuration Tool operating environment.
|
Required environment |
Remarks | |
---|---|---|---|
Display model |
All models of the GP3000 series |
| |
OS |
|
| |
Drawing software |
GP-Pro EX Ver.1.10 or higher Runtime version Ver.1.10.00 or higher |
| |
Driver for connected device |
Mitsubishi Electric Corporation |
A Series CPU Direct (Protocol version: Version 1.12.01 or later) FX Series CPU Direct (Protocol version: Version 1.12.05 or later) Q Series CPU Direct (Protocol version: Version 1.10.02 or later) QnA Series CPU Direct (Protocol version: Version 1.10.02 or later) QUTE Series CPU Direct (Protocol version: Version 1.10.02 or later) |
For CPU models compatible with each series, refer to the "GP-Pro EX Device/PLC Connection Manual".
|
OMRON Corporation |
CS/CJ series Host Link (Protocol Version: Version 1.12.02 or later)
CS/CJ series Ethernet (Protocol Version: Version 1.12.03 or later)
|
||
KEYENCE Corporation |
KV-700/1000/3000/5000 CPU Direct (Protocol version: Version 1.13.02 or later)
|
||
Yokogawa Electric Corporation |
Personal Computer LInk SIO (Protocol version: Version 1.11.02 or later)
Personal Computer LInk Ethernet (Protocol version: Version 1.11.02 or later) |
||
Siemens AG |
SIMANTIC S7 MPI Direct (Protocol Version: Ver.1.13.03 or higher) |
||
Rockwell Automation, Inc. |
DF1 (Protocol version: Version 1.12.06 or later) |
||
Yaskawa Electric Corporation |
MP Series SIO (Extension) (Protocol Version: Version 1.10.00 or later) MP Series Ethernet (Extension) (Protocol Version: Version 1.10.00 or later) |
||
Panasonic Electric Works Co., Ltd. |
FP Series Computer Link SIO (Protocol Version: Ver.1.12.02 or higher) |
||
Ladder Software |
GX Developer - MELSEC PLC Programming Software by Mitsubishi Electric Corporation |
OS running on PC
|
For details about the ladder software, refer to the manual of the connected device. |
CX-Programmer - PLC Support Tool Software by OMRON Corporation |
Version 3.0 or later |
||
KV Studio, KV Builder - Ladder Support Software by KEYENCE Corporation |
KV STUDIO: Version 1.17, Version 2.50, Version 4.14, Version 5.02 |
||
WideField2 - FA-M3 program development tool by Yokogawa Electric Corporation |
R3.01 or later |
||
MPE720 - Engineering Work Station for the MP Series machine controller by Yaskawa Electric Corporation |
Version 5.38 to Version 6.04 or later |
||
Step7, STEP 7 Micro/WIN - Siemens AG programming tool |
STEP7 Version 5.1 or later STEP7 Micro/WIN Version 4.0.1.10 or later |
||
RSLogix - Rockwell Automation, Inc programming tool |
RSLogix500 RSLogix5000 |
||
Control FPWIN GR - Panasonic Electric Works Co, Ltd Programmable Controller Software |
Control FPWIN GR Version 2.3 or later |
||
Cable |
USB transfer cable CA3-USBCB-01 (optional accessory) made by Pro-face Commercially-available LAN cable (Ethernet cable) |
|