Please refer to the Settings Guide for details.
23.4 Settings Guide
Please refer to the Settings Guide for details.23.4 Settings Guide
The motor power (M100) is run from Monday to Friday, 8:00 to 17:00. Here is the setting procedure for turning ON the bit address M100 at the start time (8:00) and OFF at the end time (17:00).
From the [Common Settings (R)] menu, select [Time Schedule (F)] or click 
. The Time Schedule tab appears.
Click the row of the schedule number you want to register (for example, Number 1). The settings dialog box appears.
You can register up to 32 schedules (Number 1 to Number 32) in the schedule function.
From [Mode], select [Bit Set].
In [Action Address], set the target bit address (for example, M100).
Select the [Time Set] tab then select [Constant].
Set the Start Time and Day. Set the Start Time as 8:00 and select the Monday to Friday check boxes. Clear the [Setting on Individual Day] check box.
Set the end time. Select the [Enable Termination Action] check box and set the end time as 17:00.
Click [OK]. The settings appear in the Schedule Settings tab.
