Device/PLC
Designate the device/PLC where data will be sampled.
Bit Length
Choose which bit length the designated address data will be stored as, from either [16 Bit] or [32 Bit].
If you change this setting, contents on the [Display/Save in CSV] tab and [Print] will be reset.
If the defined [Sampling Words] is above 256 16 Bit addresses, all addresses above 256 will be deleted when you change the [Bit Length] from [16 Bit] to [32 Bit].
Sampling Words
The set number of address will be displayed in [Address List].
Address List
The number of addresses in [Sampling Words] are displayed in a list, starting from the designated [Sampling Start Address]. Each [Bit Length] has a different size range.
16 Bit: 1 to 512 rows
32 Bit: 1 to 256 rows
When you change between [Random] to [Sequential], all address fields and the [Display/Save in CSV] and [Print] settings are initialized.
If [Random] is selected, it will take longer to communicate with the device than when [Sequential] is selected.
When you select the row you want to delete from the address list and press the [Delete] key, the delete confirmation dialog box will appear. You can delete it by clicking [Yes].