The server computer display data is appears with a color number decreased according to the color specified in the display unit.
If you set the USB keyboard to be used with [Input Device Settings], [RPA Input] other than the RPA feature, the settings will not be not used.
The Remote PC Access Window may not be able to display everything viewed on the server PC. For example, protected movies from a Web site will not appear on the display unit.
There may be a short time delay between the display on the display unit and the display on the server computer. For example, in the [Date and Time Properties], the seconds display for the [Time (T)] object may not match.
Using the Remote PC Access feature, if you set the Orientation to [Portrait], the screen displays the same as [Landscape].
Set [Orientation] to [Landscape].
When displaying the Remote PC Access Window, overall performance is reduced.
You can connect each USB keyboard or USB mouse for remote PC access input. To connect or disconnect with the server computer may take time.
Connection and disconnection to the server computer may take time. On the server PC, make sure the display settings are set to 16 bit color quality.
In the Window Control Panel's [Display Properties] dialog box, see the [Settings] tab. Other color settings will prevent the display unit from connecting.
A project other than the current project cannot be transferred to the display unit itself using the RPA feature. This is because the display unit transits to offline while being transferred and the RPA feature is interrupted.
36.5.1 Remote PC Access Window Display Unit Restrictions
36.5.2 Remote PC Access Window Restrictions
36.5.3 Server Computer Connection Restrictions
36.5.4 RPA Popup Keypad Restrictions