Safety Symbols and Terms
This manual uses the following symbols and terms to identify important information related to the correct and safe operation of display units and GP-Pro EX. The symbols and the descriptions are as follows:
Symbols and descriptions are as follows.
Display |
Description |
---|---|
|
Indicates a hazardous situation that will result in serious injury or death. |
|
Indicates a potentially hazardous situation that could result in serious injury or death. |
|
Indicates a potentially hazardous situation that may result in minor injury or equipment damage. |
|
Indicates instructions or procedures that must NOT be performed to ensure correct product use. |
|
Indicates instructions or procedures that MUST be performed to ensure correct product use |
|
Indicates a potentially damaging action or dangerous situation that could result in abnormal equipment operation or data loss. |
General Information Symbols and Terms
This manual uses the following symbols and terms for general information.
Display |
Description |
---|---|
|
Provides tips on correct product use or supplementary information. |
* |
Indicates an item with an explanatory footnote. |
|
Indicates an item's related information. |
1, 2 |
Indicates an operation procedure. Follow the numbered steps. |
Terminology
This manual uses the following terms and acronyms in its descriptions:
Display |
Description |
---|---|
Screen editing software |
Indicates GP-Pro EX. |
PLC |
Indicates Programmable Logic Controllers. |
GP |
Indicates GP3000 Series. |
LT |
Indicates LT3000 Series. |
IPC |
Indicates PS Series, PL Series, and PC/AT compatible machines. |
ST |
Indicates ST3000 Series. |
This manual describes operations with an emphasis on the GP3000 Series. If you are using a different display type, substitute the term "GP" or "display unit" with your display type, keeping in mind that functions differ between models. To check which functions are supported by your particular display type, see Supported Features.