Viewer Settings
Remote Viewer
Set the GP-Viewer EX function.
Enable
Set whether to enable the GP-Viewer EX function.
Enable screen changes from client
Set whether to enable GP screen switching from GP-Viewer EX.
If this item is not selected, even users with read/write permission in Security Settings cannot switch the screen from the GP-Viewer EX side.
FTP Settings
Enable FTP
Set whether to enable the FTP function.
Web Server Settings
Set the Web Server function.
Enable Web Server
Set whether to enable the Web Server function.
HTTP Port Number
Set the port number used by the Web Server function with a value from 1 to 65535.
We recommend that you use port number 80. However, if port number 80 cannot be used because of an existing firewall, you must change the port number.
For information about usable port numbers, refer to the Firewall Settings because usable port numbers depend on Firewall Settings.
Time Zone Settings
Time Zone
Offset from Greenwich Mean Time
Set the standard time of the location of the PC by specifying the difference from the Greenwich Mean Time.