Set the system menu details and the display position of error messages.
System Language Settings
Set the language used for the system menu, brightness/contrast adjustment, error messages (both single-line and detailed messages), and File Manager. Select either [JAPANESE] or [ENGLISH].
When you use the GP-3200 series, the ST-3200 series and the GP-4100 series and if you select [System Settings] - [Font] - [Font Used in Project] and in GP-Pro EX clear the [Japanese Standard Font] check box, you cannot select JAPANESE and other languages from the combo box. The combo box is disabled and does not accept touch.
Refer to the following for [Font] settings on GP-Pro EX.5.19.12 Font Settings Guide
Defines the position of the system menu. Select [Not Display], [Lower Part] or [Upper Part].
Show Error Online
Select the timing to clear the error display in online mode. Select [None], [Clear at Recovery], or [Clear on Screen Change].
Even though [Clear at Recovery] is selected, if an error message displays due to a communication error on writing to the connected device, the message will not clear. To clear such an error message, change the screen.
Error Display Position
Select the position to display errors. Select either [Upper Part] or [Lower Part].
Set whether to perform automatic recovery when a system error occurs. [Enable] restarts the display unit 20 seconds after an error has occurred.