The Backup SRAM data in a display unit (Backup data in the Internal User Memory when using GP-4100 series) is deleted.
[Start]. Please be careful as you cannot stop initialization after it's started.
Do not turn OFF the power switch while initialization is in progress.
Backup data will be cleared by initialization.
Even if initialization is executed, system data, communication protocol data, time setup data and logic program data will not be cleared.
Please input the system password and press the Start switch.
Touch the system password entry field and enter the system password. If you have not specified a system password, enter "1101" (standard password).
Start
Starts initialization of the backup SRAM.