Deletes all data in the display unit's user memory.
[Start]. Please be careful as you cannot stop initialization after it's started.
Do not turn OFF the power switch while initialization is in progress.
The Backup SRAM data (Internal User Memory data when using GP-4100 series) is also deleted.
Initialization does not erase the SYSTEM SET UP, the SIO protocol, or the internal clock settings.
All data retained by the logic program is also erased.
The time required for Initialization is between 10 and 20 seconds.
Please input the system password and press the Start switch.
Touch the system password entry field and enter the system password. If the system password has not been set, enter the standard password [1101].
Start
Start the initialization of the user memory.