You can check the address mapped to I/O terminals from the logic program.
This type of information is called an I/O address, and is displayed above the address in the following way.
I/O address display: %AB.1.C.D
(The underlined "%" and "1" are fixed.)
A
Stores the following ID symbol for an I/O terminal.
|
I/O Terminal |
ID symbol |
|---|---|
|
Input pin |
I |
|
Output Terminal |
Q |
B
Stores "X" for a bit pin and "W" for a word pin.
C
Stores the FLEX NETWORK S-No.
D
Stores the pin Number