If you change the pulse shot to a value smaller than the current value during the pulse output, the output stops.
Specify the Output pulse count. You can use 0 to 2147483647 for setting the Output pulse count.
If you change the pulse shot to a value smaller than the current value during the pulse output, the output stops.
Set Up Process in GP-Pro EX
In [System Settings], select [I/O Driver] and click [Pulse Settings] on the [Internal Driver 1] screen.
Specify the [Output Pulse Number] in the [Pulse Settings] dialog box.
Set Up Process with System Variables
Output pulses are defined in the system variable (#L_PLS*_NUM). The system variable name adjusts to match the CH pulse output to which it's mapped.