Switching Screens Using a Logic Program
By using logic functions and performing easy to use Windows operations, you can create a logic program that conforms to international standard IEC61131-3.
The logic program you write downloads and runs on the display unit. Also, variables created in your logic program can be shared with other screen functions (such as switches and lamps).
|
Switching Screens Using a Logic Program |
|---|
|
|
|
Generating a Pulse at One Second Intervals |
|---|
|
Using the counter, you can create a circuit that counts up every 1 second.
|
|
Entering the Timer Value on the Screen |
|---|
|
|
|
Moving Data Between Device Addresses |
|---|
|
You can specify the device address using the logic program.
|
