You cannot use the following features on the Hand-held GP.
Screen Capture
JPEG Display
Remote PC Access
Remote Printer Server
Logic Feature
The function key cannot be registered in a Package.
The preview screen does not display function keys.
Function keys do not display in the [Properties] window.
If you change the display unit, all the functions added to switches are copied.
There is no limit to the number of parts you can set up on a local function key. There is a limit of 384 parts you can add to a single Hand-held GP screen, which includes function keys. You cannot add more than the maximum 1152 registers to read per screen.
You can add the maximum 384 parts to each global function key. You can also add to each function key up to 1152 registers to read.
The operation switch is not available during simulation.
In the [Display Unit] page's [Operation] tab, if [Touch Panel Detection] is set to [OFF Detect], parts set up on the operation switch will not work.
When operations are prohibited due to the Operation Lock, function key inputs are not accepted.
The following features do not run in simulation.
Operation tab's [Operation Switch] setting
(In simulation, [Operation Switch] is always set to [Disable].)
Conversion adapter functions
(DOUT, external buzzer, unit Number)
Function keys are not available on Window screens.
When a communication error occurs due to noise between the Hand-held GP and conversion adapter, you may not be able to turn ON/OFF the buzzer or DOUT.