If the device specified in the [Basic] tab's [Monitor Word Address] field is not compatible, the Time-Base function will not work.
If you select the [Time-Base] check box, you cannot change the following items:
|
Category |
Items |
Fixed Value |
|---|---|---|
|
Basic |
Address Type |
Direct Specification |
|
Input/Display Range Definitions |
Disable | |
|
Data Type |
16 Bit Dec | |
|
Sign +/- |
Disable | |
|
Round Off |
Disable | |
|
Display |
Total Display Digits |
3 |
|
Decimal Places |
0 | |
|
Display Style |
Align Right | |
|
Zero Suppress |
Enable | |
|
Zero Display |
Enable | |
|
Display Format |
Disable | |
|
Alarm/Color Settings*1 |
Ranges |
1 |
|
Area Specification |
Constant | |
|
Range Number |
Min: Max: | |
|
Alarm Action |
Direct | |
|
Processing |
Processing |
Disable |
|
Allow Input |
Input Barcode |
Disable |
*1If the [Allow Input] check box is selected in the [Basic] tab and the [Fixed Input] check box is cleared in the [Time-Base] group, you cannot change the [Alarm] in the [Alarm/Color] tab.
You can set the [Alarm Range] with a value from 0 to 999.
In the middle of a data input from the display unit, even if you change how the defined address stores its data, the input will continue to use the previous input setting. This is not updated in real time.