Pass-Through Function

Please see below for required drivers and the system requirements to use the pass-through function.

Please refer to [Pass-Through Function Guide] for installation or settings of the pass-through function.

When using the Pass-Through Function by SIMATIC S7 MPI Direct Driver, please refer to [SIMATIC S7 MPI Direct Driver Pass-Through Function Guide].

For details about how to connect to the Display, click the hyperlink in the Driver column to open the manual PDF (portable document format) file for that driver.

Maker

Driver

System Requirements

Mitsubishi Electric Corporation

A Series CPU Direct

The following GPP function software package is required.

• Windows 2000:
  GX Developer Ver.7 or higher

• WIndows XP:
  GX Developer Ver.8 or higher

Q Series CPU Direct

QnA Series CPU Direct

QUTE Series CPU Direct

FX Series CPU Direct

YASKAWA Electric Corporation

MP Series SIO (Extension)

The following enginiering tool is required.

MPE720 Ver5.38 / Ver6.04 or higher

MP Series Ethernet (Extension)

Yokogawa Electric Corporation

Personal Computer Link SIO

The following programming tools is required.

WideField2 R3.01 or higher

Personal Computer Link Ethernet

OMRON Corporation

CS/CJ Series HOST Link

The following programming support Tool is required.

CX-Programmer Version 3.00 or higher

CS/CJ Series Ethernet

The following programming support Tool is required.

CX-Programmer Version 3.00 or higher

If High Performance Unit is written by the Pass Through Function, response of Link Unit temporarily stops and an error may be displayed on the Display.

SIEMENS AG

SIMATIC S7 MPI Direct

The following programming tool is required.

• SIEMENS SIMATIC Software STEP7 Version 5.1 or higher

• STEP7 - Micro/WIN Version 4.0.1.10 or higher