System Language
Set the system language to either [English] or [Japanese]. The system language controls the language for the system menu, Brightness/Contrast Control, and error messages.
Offline Language
Select the offline mode display language from either [English] or [Japanese].
Show System Menu
Select the system menu position: [Do Not Display], [Upper Part], or [Lower Part].
After displaying the System Menu and another system window such as alarm banner or error message window is displayed, that window is automatically positions after the last displayed system window. For information on system windows, refer to the following.
12.9 Displaying Multiple Windows on a Single Screen
You can move the displayed System Menu to the top or bottom of the screen by touch.
Show Error Online
Select the timing for displaying errors and clearing displayed errors in online mode, from [Clear at Recovery] or [Clear on Screen Change].
So the error is not displayed, select [None].
Clear at Recovery
Displays the error. The error message is removed when it recovers from the error.
Clear on Screen Change
Displays the error. After recovering from the error, the error message is removed when the screen is changed.
None
Error is not displayed.
The error message that occurs when the device/PLC cannot be written to due to a communication error will not be deleted from the display unit, even if [Clear at Recovery] is specified. You can delete this error message by initiating a screen change.
Error Display Position
Select the error message display position: [Upper Part] or [Lower Part].
After displaying error messages and another system window such as alarm banner or the System Menu window is displayed, that window is automatically positions after the last displayed system window. For information on system windows, refer to the following.
12.9 Displaying Multiple Windows on a Single Screen
You can touch to move the displayed error message to the top or bottom of the screen.
Auto Recovery on System Error
When the [Enable] option is selected, the display unit restarts when a system error arises.