Please refer to the Settings Guide for details.
5.4.2 System Settings [Display Unit] - [Display] Settings Guide
For details about placing switches or setting addresses, shapes, colors, and labels, please see the parts editing topic.
8.7.1 Editing Parts
When you touch a switch on the Base screen, the same Window displays on all screens.
From the [System Settings] of the [Project] menu, click [Display Unit] and open the [Mode] tab.
From [Global Window Operation], select [Direct].
Set the [Window Screen] to "1". Set the [Display Position X-Coordinate] and [Display Position Y-Coordinate] of the Window on the Base screen.
The Global Window settings are complete.
Place the switch on the Base screen. Double-click the switch. The Settings dialog box appears.
Do not place overlapping switches when displaying a Global Window.
Set the [Bit Address]. From [Device/PLC], select [#INTERNAL] and designate LS0016 bit 0.
From [Bit Action], select [Bit Invert]. Click [OK].