Cause
The display unit's touch coordinate needs to be corrected.
Solution
When using the IPC Series, and PC/AT compatible machines
Run the calibration on the IPC Series or PC/AT unit, touch the arrow marks or x marks that are displayed on the screen in sequence . Complete the touch coordinate correction and select [OK] in the calibration confirmation dialog box.
For details, refer to the user manual of the model you are using.
When using the SP5000 Series Open Box
Refer to the "SP5000 Series Open Box Reference Manual".
You can download the manual from our support site (http://www.pro-face.com/trans/en/manual/1001.html).