Check if your system is compatible with the Pass-Through Configuration Tool operating environment.
PC |
Windows(R) PC/AT compatible machine |
|
Operating System |
64-bit versions of Home, Pro, and Enterprise
32-bit/64-bit versions of Home, Pro, and Enterprise |
|
Memory |
Follows the above operating system requirements. |
|
Hard disk space*1 |
3 MB or more (16 MB or more for MPI pass-through) |
|
Drawing software |
GP-Pro EX Ver.1.10 or later (Runtime version: Ver.1.10.00 or later) For WinGP, GP-Pro EX Ver.2.50 or later (Runtime version: Ver.2.50.00 or later) |
|
Driver for connected device |
Refer to "About the Pass-Through Function" in the "GP-Pro EX Device Connection Manual". |
|
Ladder Software |
The ladder programming software for the connecting device to be used must be installed. Refer to the "GP-Pro EX Device/PLC Manual" for the required ladder software. For the operating environment of the ladder software, refer to the manual of the connected device. |
|
Required equipment |
Required.
Used during installation.
|
*1 Free space required for installation.