-
Please refer to the Settings Guide for details.
10.15 Switch/Lamp Parts Settings Guide
-
For details on how to draw parts, and defining the address, shape, color, and labels, please see the parts editing topic.
8.7.1 Editing Parts
Please refer to the Settings Guide for details.
10.15 Switch/Lamp Parts Settings Guide
For details on how to draw parts, and defining the address, shape, color, and labels, please see the parts editing topic.
8.7.1 Editing Parts
Create a switch that turns ON a bit address (M100) for as long as it is pressed.
On the [Parts (P)] menu, point to [Switch Lamp], and select [Bit Switch (B)], or click 
to place a switch on the screen.
Double-click the placed Switch part. The following dialog box appears.
In [Select Shape], select the Switch shape.
Specify the [Bit Address] that you want to operate when the switch is touched.
Confirms that [Bit Momentary] has been selected for [Bit Action].
As needed, set the color and display text on the [Color] tab and [Label] tab, and click [OK].
Depending on the shape, you may not be able to change the color.
When you select a switch and press the [F2] key, you can directly edit the text on the label. When [Text Table] is selected, you can change the current Text Table.