23.3.1 Procedure - Limiting Screen Access by Authority

Set up a Factory Manager screen (B3) with security level 5 and a password.

1. From the [Common Settings (R)] menu, point to [Security (Q)] and select [Security Password (P)], or from the toolbar click .

2. Password setting screen will open. Select the [Enable Security Function] check box and enter [Level 1] and [Level 5] passwords.
   
    

   

   • Set a password up to eight single-byte alphanumeric characters long.

   • Select the [Add User ID] check box to add the User ID to the Password. As with the password, User IDs can be up to eight single-byte alphanumeric characters long.

3. From the [Common Settings (R)] menu, point to [Security (Q)] and select [Security Level List (L)].

4. Set the Line Manager screen (screen number B2) with security level [1], and the Factory Manager screen (screen number B3) with security level [5], to complete the security settings.
   
    

   

   • Once you log in, the security level you logged in at is enabled until you turn off the power.
     If you logged in with high security, and you leave your desk, we recommend clearing the security level first to enhance security.
     23.10.1.1 Password Settings