23.2.1 Procedure - Creating Limited Access Screens

Set the Line Manager screen with a security level and password.

1. From the [Common Settings (R)] menu, point to [Security (Q)] and select [Security Password (P)], or from the toolbar click .

2. Password setting screen will open. Select the [Enable Security Function] check box, and in [Level 1] enter the password.
   

   

   • Set a password up to eight single-byte alphanumeric characters long.

   • Select the [Add User ID] check box to add the User ID to the Password. As with the password, User IDs can be up to eight single-byte alphanumeric characters long.

3. From the [Common Settings (R)] menu, point to [Security (Q)] and select [Security Level List (L)].

4. For Line Manager (Screen: B2), set the [Security Level] to 1. The security settings are complete.
   
    

   

   • Once you log in, the security level you logged in at is enabled until you turn off the power.
     If you logged in with high security, and you leave your desk, we recommend clearing the security level first to enhance security.
     23.10.1.1 Password Settings