Screen Hard Copy
Prints the displayed screen on the display unit as it appears.
35.4 Printing the Current Screen (Screen Hard Copy)
Alarm Banner
Prints an alarm message in the displayed language (table) when it triggers or recovers.
-
This type of printing is not supported by the [GP Remote Printer Server]. When the printer receives printing instructions, it prints one sheet per line.
Alarm History
-
Real-time Print
Prints when an alarm is triggered, confirmed, or recovered.
-
This type of printing is not supported by the [GP Remote Printer Server]. When the printer receives printing instructions, it prints one sheet per line.
-
Batch Print
Prints all the alarm history in a specified format when a specified [Print Word Address] Bit 0 is turned ON.
Sampling
-
Real-time Print
Prints in the print format specified in [Sampling] each time it collects data.
-
This type of printing is not supported by the [GP Remote Printer Server]. When the printer receives printing instructions, it prints one sheet per line.
-
Batch
You can print in Block units when in the [Sampling] screen's [Mode] tab, [Extended] settings area, the [Overwrite old data after finishing the specified cycles] check box is cleared.
Prints the collected data in block unit in a specified print format when a specified [Print Word Address] Bit 0 is turned ON.
Printing CSV Data
Prints the displayed CSV data when you touch the print key on a special data display [Show CSV]. You can select whether to print only the displayed portion or to print the whole data.
26.7 Displaying/Editing CSV data on the Screen
Script Printer Output
When printer operation functions are run from D-Script, Global D-Script, and Extended Script, only the specified bytes are printed. This type of printing is not supported by the [GP Remote Printer Server].