Logic Program
[On] enables set up for all the following items. [Off] prevents set up.
Fixed Scan Time
Specify the logic function execution time. Setting range: 10 to 2000 ms
CPU Scan Percentage
Set the ratio of the execution time of the logic function to a value within the range of 10% to 50%.
WDT (100-3000)
Set the watch dog timer to a value between 100 and 3,000 ms.
Run at Start Up
When turning ON the display unit, select whether to [RUN] or [STOP] the logic operation.
Data Update Rate
Select the speed for updating device addresses of connected devices and internal devices assigned to the logic program, [Fastest], [Normal], or [Slowest].
Minor Errors
When a minor error arises, select whether to [RUN] or [STOP] the logic operation.
I/O Settings
Select [On] to use I/O operation. to [Stop] I/O operation, select [Off].